2021 Ford Ranger Raptor 2.0 Bi-Turbo

The Ford Ranger in Malaysia typically uses diesel or petrol. Generally, common petrol grades such as RON 95 or RON 97 are applicable. For diesel versions, types of diesel meeting local standards are used. The specific type of fuel to be used should still be referred to the vehicle's user manual and the supply conditions of local petrol stations.

The Ford Ranger is produced by the American Ford Motor Company. Ford is a globally renowned automaker, and its products are sold all over the world, including in Malaysia. The Ford Ranger has gained attention among pick-up models for its outstanding performance, reliability, and practicality.

The automatic door locking function while driving the Ford Ranger is typically a standard safety setting. Most common versions of the Ford Ranger sold in Malaysia are equipped with this function to ensure the safety of drivers and passengers during travel. However, specific auto-lock settings may vary depending on the vehicle's configuration.

In Malaysia, both the Ford Ranger and Toyota Hilux are popular pickup truck models. The Ford Ranger has excellent performance of power and handling, with a more modern and comfortable interior setup. In addition, its exterior design shows a sense of power, leaving a deep impression on consumers. The Toyota Hilux is renowned for its reliability and durability. It generally has lower maintenance costs and provides stable performance under the complex road conditions in Malaysia. Moreover, its resale value is usually higher. However, which one is better depends on your specific needs. If you value power and control, the Ford Ranger may be more suitable; if you prefer reliability and resale value, the Toyota Hilux might be a better choice.

To open the hood of Ford Ranger, usually, you can follow these standard procedures: First, find the hood release handle inside the cabin, typically positioned near the driver's left knee area. Next, pull the handle until you hear the sound of hood popping up. Then move to the front of the vehicle where you'll find a release lever at left of center under the hood's edge; slide this lever to the right while lifting the hood. Always ensure the vehicle is securely parked and in a safe condition before operation.

The method to unlock the Ford Ranger depends on the specific configuration and model. Generally speaking, you can use the car key to directly unlock the door. Some higher-end models may be equipped with a smart key system, whereby the car can automatically sense and unlock when you approach it. Some models may also support unlocking operations via a mobile app. Regardless of the methods, if you encounter any unlocking failures or issues, it is recommended to contact Ford's official after-sales service.

The body length of the Ford Ranger varies depending on the specific model and configuration. The common body length Ford Ranger is usually around 5370 millimeters. However, it should be noted that there may be slight differences in size for models of different years and configurations.

To dismantle the rear bumper of Ford Ranger, you first need to prepare the appropriate tools, such as wrenches, screwdrivers, etc. Then, locate the screws and fastening points that secure the rear bumper, usually at the bottom, sides, and interior of the vehicle. Carefully loosen and remove these screws and fasteners, being careful not to use excessive force to avoid damaging parts. During the disassembly process, be aware of the wiring and sensors connected to the rear bumper to avoid causing damage. After finishing the above steps, you can remove the rear bumper from the vehicle. However, it is recommended that if you do not have the relevant experience, it is best to seek the help of a professional mechanic.

To reset the transmission of Ford Ranger, you can follow these general steps: First, turn off the engine and wait for a few minutes. Next, restart the vehicle while keeping it stationary in Park (P) position. Then, step on the brake pedal, and quickly press the accelerator pedal to the floor and release it, repeating this procedure several times. Please note that specific procedure may vary depending on the model year and configuration of the Ford Ranger. If this method is ineffective, we recommend consulting a professional automotive repair shop for assistance.

To replace the battery of the key of Ford Ranger, you will first need to prepare a new suitable battery, such as CR2032. Next, use a small screwdriver or similar tool to gently pry open the key shell, being careful not to use excessive force to avoid damage. Then, remove the old battery and insert the new one, making sure the positive and negative terminals are correctly oriented. Then, reassemble the key shell. During the operation, be careful to ensure that no parts are damaged.