2020 BMW M850i xDrive Gran Coupe

The cost of replacing the spark plugs of Hyundai Sonata ranges from approximately RM200 to RM500, depending on the model year, engine type (1.6T or 2.5T), and the brand of spark plugs used (such as NGK, Denso, or original factory parts). A standard 1.6L Turbo engine usually uses iridium or platinum spark plugs, which cost around RM50 to RM150 each. On the other hand, the 2.5L Turbo engine (N - Line version) may require higher - performance spark plugs, which are slightly more expensive (around RM80 to RM200 each). In addition, labor costs typically range from RM80 to RM150. Dealerships may charge more, providing factory - certified parts. Third - party repair shops offer lower prices, but you need to make sure the technicians perform well in the operation. The spark plug replacement interval for the Hyundai Sonata is generally between 60,000 and 100,000 kilometers. However, if your vehicle experiences vibrations, has difficulty starting in cold weather, or shows an increase in fuel consumption, you may need to check the spark plugs earlier. It's recommended that owners have technicians inspect the spark plugs during regular maintenance and choose high - quality spark plugs that can withstand high temperatures and resist carbon deposits to ensure optimal engine combustion efficiency.

The Mitsubishi ASX falls into the category of small cars, to be precise, it's a compact SUV. According to vehicle segment classification, it's categorized as a C-Segment model. It measures 4,295mm in length, 1,770mm in width, 1,615mm in height, with a wheelbase of 2,670mm, whose overall dimensions meet the standards for small cars. In terms of market positioning, the ASX is mainly targeted at consumers who use cars for urban commuting and those who pursue practical small SUVs. Its moderate body size makes it more convenient to navigate and park in narrow city streets and crowded parking lots. Moreover, in the small SUV market, it is competitive with its own features. For example, a 5 - year unlimited - mileage vehicle warranty and a number of standard - equipped safety features all attract consumers. Although its space is limited compared to large SUVs, it can still meet the needs of daily travel and general cargo - carrying.

Although Lexus LC is a two-door coupe that focuses on luxury and sport performance, it features a 2+2 seating layout. That is, there are two standard seats in the front row and two small seats in the rear row. Although the rear - seat space is relatively limited and is suitable for short - distance rides or for children, it still retains more practicality in design and daily use than a pure two - seat sports car. In Malaysia, with its combination of sport performance and daily practicality, Lexus LC attracts consumers who pursue the balance between exciting driving experiences and passenger - carrying capacity. The interior of Lexus LC is made of high - quality materials, offering a comfortable riding experience. However, car owners usually pay more attention to its powerful engine (such as the 5.0L V8 engine in the LC 500) and elegant styling rather than the rear - seat passenger - carrying needs. If you often need to carry more passengers, you may need to consider four - door sedan models like the Lexus ES or LS.

As a relatively new car model (launched at the end of 2023), the price of the Proton S70 in the second - hand market is currently affected by factors such as the vehicle's age, mileage, condition, configuration version (Executive, Premium, Flagship), and regional supply and demand. Generally speaking, for a second - hand Proton S70 that's about 1 year old with a mileage of around 10,000 kilometers, the Executive version sells for approximately between RM75,000 and RM80,000, the Premium version around RM85,000 to RM90,000, while the top - of - the - line Flagship version might cost about RM95,000 to RM100,000. The official price of a new car (excluding insurance and road tax) is between RM73,800 and RM94,800. So, the depreciation of the second - hand Proton S70 is relatively small, especially for those with low mileage and well - maintained. It is recommended that consumers who want to buy a second - hand S70 compare prices through multiple channels like Carlist, Mudah, or second - hand car dealerships. And they must check the vehicle's condition records (such as the PUSPAKOM inspection report and the status of the original warranty) to ensure they get a cost - effective car. Additionally, since Proton offers a 5 - year/150,000 - kilometer original warranty, a second - hand S70 still within the warranty period holds its value better and is more worthy of purchase.

The Toyota Rush is typically a 7-seater vehicle. This car has gained popularity in the Malaysian market, as its 7-seat layout effectively meets the needs of family trips and multiple passengers.

In Malaysia, the procedure to use Honda engine flush is generally as follows: 1. Ensure that the vehicle is turned off and has cooled down. 2. Open the car hood and locate the engine oil filler cap. 3. Pour an appropriate amount of Honda engine flush into the oil filler opening. 4. Start the engine and let it idle for about 10 to 15 minutes to allow the flush to circulate thoroughly within the engine. 5. Turn off the engine and wait for 5 to 10 minutes to let the flush work and settle any dirt. 6. Drain the old oil along with the flush through the oil drain bolt, replace the oil filter, and add new oil.

Currently, the Honda City (the 6th generation model from 2020 to present) is equipped with a 1.5L i - VTEC naturally aspirated engine (L15B). For a standard oil change (including replacing the oil filter), the total engine oil capacity is approximately 3.3 to 3.5 liters. If you only drain the oil without replacing the filter, the oil filling volume is about 3.0 liters. Honda recommends using fully synthetic engine oil. The recommended viscosities are 0W - 20 or 5W - 30, such as the Honda Genuine Ultra or Ultimate series. This type of oil can adapt to the tropical climate in Malaysia and optimize fuel efficiency. When filling the oil, you need to check the oil level with the dipstick to ensure it is between the MIN and MAX marks. Over - filling may affect engine performance or cause damage to the oil seals. It is recommended that car owners change the engine oil according to the official maintenance schedule (every 10,000 kilometers or 6 months) to keep the engine running in the best condition.

The fuel consumption of the Proton X70 varies depending on different powertrain configurations and driving conditions. For models equipped with a 1.5-liter turbocharged engine, the average fuel consumption under combined driving conditions is about 7.6 liters per 100 kilometers. The 1.8-liter turbocharged version has a slightly higher consumption, around 8.2 liters per 100 kilometers. The actual fuel consumption may fluctuate due to factors such as driving habits, road conditions, and vehicle load. To optimize fuel consumption, it is recommended that car owners maintain a smooth driving style, avoid sudden acceleration and braking, and conduct regular vehicle maintenance, such as checking tire pressure and replacing the air filter. In addition, as an SUV, the Proton X70's fuel - consumption performance is at a medium level compared with models in the same class, making it suitable for family users who value space and practicality. If you want to learn more about how to improve fuel economy, you can refer to the driving suggestions provided by Proton official or consult professional technicians at authorized repair centers.

As a highly - regarded SUV in the Malaysian market, the Proton X70 currently offers a variety of models to meet different needs. It mainly includes four versions: Standard, Executive, Premium, and Flagship. The Standard version, as the entry - level model, comes equipped with basic safety features such as ABS and dual airbags. It's suitable for consumers on a tight budget. The Executive version adds power seats and a larger touchscreen, enhancing the comfort level. The Premium version further includes a panoramic sunroof and a high - end audio system, which is ideal for users who pursue quality. The Flagship, as the top - of - the - line version, features all - LED headlights, adaptive cruise control, and a 360 - degree camera, making it perfect for car owners who value technological and luxurious experiences. In terms of power, all versions are equipped with a 1.5T or 1.8T turbocharged engine, paired with a 7 - speed dual - clutch transmission, balancing both power and fuel economy. The diverse options of the Proton X70 enable it to meet the needs of different users, ranging from economy - oriented to high - end ones. Meanwhile, its local production and after - sales network also provide convenience for Malaysian consumers. For users who are interested in buying a car, it is recommended to choose the appropriate version based on their own budget and needs, and visit an authorized dealer for a test drive to experience the actual driving feeling.

The method to connect Bluetooth in a Proton Persona is generally as follows: First, turn on the vehicle's power to ensure it is in an operational state. Then, locate the settings option on the vehicle's infotainment screen and navigate to the Bluetooth settings. Next, enable the Bluetooth function on your phone and search for your phone in the vehicle's list of Bluetooth devices to initiate pairing. During the pairing process, you may need to enter a pairing code, which is typically "0000" or "1234". Once the pairing is complete, your phone will be successfully connected to the Proton Persona's Bluetooth system, allowing you to play music, make phone calls, and perform other related operations.