Q

mitsubishi xpander 1 liter berapa km

Let's talk about the Mitsubishi Xpander's fuel efficiency. Official figures state it'll do roughly 14 to 16 kilometers per liter, though your actual mileage will vary based on your driving style, road conditions, and how well you maintain the vehicle. City traffic with all its stop-and-go will naturally push that number up a bit, while cruising on the highway should see it dip nicely. Powering this 7-seater MPV is a 1.5L MIVEC engine paired with a 4-speed automatic transmission. The focus here is clearly on smooth power delivery and good fuel economy, making it a solid fit for family hauling duties. If you're looking to squeeze every last kilometer out of a tank, regular maintenance is key—think replacing the air filter when needed and using the right viscosity engine oil. Also, avoid jackrabbit starts or overloading the vehicle, and keep those tires properly inflated to the recommended pressure (you'll usually find that sticker on the door jamb). It's worth mentioning that the quality of Malaysia's RON95 petrol and how well it gels with the engine can have a minor impact on fuel consumption, but rest assured, the Xpander's ECU has been tweaked to work well with our local fuel. When you stack it up against rivals like the Toyota Avanza or Honda BR-V, you'll find their fuel economy figures are in the same ballpark. Ultimately, your choice might come down to space requirements and brand loyalty. My advice? Take it for a test drive and keep an eye on the real-time fuel consumption display to get a feel for how it performs in the real world.
Special Disclaimer: This content is published by users and does not represent the views or position of PCauto.

Related Q&A

Q
What engine is in the Mitsubishi Xpander 2023?
The 2023 Mitsubishi Xpander is powered by a 1.5-liter MIVEC four-cylinder naturally aspirated gasoline engine, delivering a maximum output of 105 horsepower and a peak torque of 141 Nm. It comes paired with either a 5-speed manual or a 4-speed automatic transmission. This engine prioritizes fuel efficiency and smoothness, making it ideal for daily family use. As a 7-seater MPV, the Xpander's engine is tuned to emphasize low-end torque, suiting city driving and load-carrying needs. It also features Mitsubishi's MIVEC variable valve timing technology, which optimizes power response and fuel consumption. Among its peers, many competitors like the Toyota Avanza or Honda BR-V also use naturally aspirated engines of similar displacement, but their tuning and technical focuses vary. The Xpander stands out for its high reliability and relatively low maintenance costs, appealing to practicality-minded consumers. For those seeking more power, Mitsubishi offers other models with turbocharging technology, but the Xpander is positioned more towards economy and practicality, targeting family users.
Q
How much is the new Xpander 2023?
The official price of the all-new 2023 Mitsubishi Xpander ranges from RM99,980 to RM111,980, depending on the variant, including the standard Xpander, the high-spec Xpander, and the Xpander Cross. All models are powered by a 1.5L MIVEC naturally aspirated engine paired with a 4-speed automatic transmission, delivering a smooth driving experience. The Xpander is known for its spacious 7-seater cabin and flexible interior layout, making it ideal for families. The addition of the new ADAS advanced driver assistance system further enhances driving safety. This MPV stands out for its value-for-money proposition in its class, especially appealing to consumers who prioritize practicality and comfort. When purchasing, you can also check out the promotional offers from different dealers, such as free maintenance services or low-interest loans. If you're interested in the Xpander, it's advisable to visit a nearby showroom for a test drive to experience its handling and space firsthand. You might also want to compare it with other models in the same category, like the Toyota Avanza or Honda BR-V, to make a more comprehensive buying decision.
Q
What is the ground clearance of the Xpander 2020?
The 2020 Mitsubishi Xpander has a ground clearance of 205mm, a design that makes it perform exceptionally well on Malaysia's diverse road conditions, handling both city driving and occasional country roads with ease. The higher ground clearance not only improves the vehicle's off-road capability but also effectively prevents the undercarriage from scraping on rough roads, making it particularly suitable for water accumulation section that may appear during Malaysia's rainy season. Ground clearance is one of the key indicators for measuring the practicality of SUVs and MPVs; models typically ranging between 180mm and 220mm can balance comfort and off-road performance. As a 7-seater MPV, the Xpander maintains a spacious interior while also focusing on optimizing the chassis height, giving it a competitive edge among models in its class. For Malaysian consumers, choosing a model with appropriate ground clearance is especially important, as it directly relates to the convenience and safety of daily driving, especially when dealing with areas with poor road conditions.
Q
What is the fuel consumption of the Mitsubishi Xpander Cross 2020?
According to official figures, the 2020 Mitsubishi Xpander Cross has a combined fuel consumption of approximately 6.5 to 6.9 liters per 100 kilometers, though the actual numbers can vary depending on driving habits, road conditions, and vehicle load. It’s powered by a 1.5-liter MIVEC naturally aspirated engine paired with a 4-speed automatic transmission, delivering smooth power and decent fuel efficiency—perfect for Malaysian family daily use. For owners looking to cut fuel costs further, regular vehicle maintenance, keeping tire pressure at the recommended level, and avoiding aggressive driving like sudden acceleration or hard braking can all help boost fuel efficiency. Plus, as a crossover MPV, the Xpander Cross doesn’t just shine in fuel economy; it also offers generous interior space and a higher ground clearance, making it ideal for Malaysia’s varied road conditions. Whether you’re commuting in the city or heading out for a weekend getaway, it handles it all with ease.
Q
How many seats are in the Mitsubishi Xpander 2020?
The 2020 Mitsubishi Xpander is a popular 7-seater MPV in the Malaysian market, featuring a 2+3+2 seating layout that can accommodate 7 passengers. The second-row seats fold down in a 60:40 split, while the third-row seats fold 50:50, offering flexible space configurations to meet different cargo needs. Under the hood, it's powered by a 1.5-liter MIVEC naturally aspirated engine, delivering 105 horsepower and 141 Nm of peak torque, paired with a 4-speed automatic transmission. It focuses on practicality and fuel efficiency, making it a great fit for family users. The Xpander also comes with basic features like a multifunction steering wheel and a touchscreen infotainment system. Its higher ground clearance (205mm) helps tackle some of Malaysia's rougher road conditions. Notably, the Xpander positions itself between compact MPVs and mid-size SUVs in the Southeast Asian market, competing with models like the Toyota Avanza and Honda BR-V. However, its unique exterior design and Mitsubishi's reputation for durability make it a top choice for many consumers.
Q
What size engine is in the Mitsubishi Xpander 2020?
The 2020 Mitsubishi Xpander is powered by a 1.5-liter MIVEC naturally aspirated petrol engine, model 4A91. This four-cylinder unit churns out 105 horsepower (77 kilowatts) and a peak torque of 141 Nm, paired with either a 5-speed manual or 4-speed automatic transmission. Its performance is ideal for daily family use, striking a good balance between fuel efficiency and reliability. This engine is widely used across multiple Mitsubishi models, boasting mature technology and low maintenance costs, making it well-suited for Malaysia's road conditions and climate. As a 7-seater MPV, the Xpander's engine is tuned to deliver strong low-end torque, perfect for city driving and carrying loads, aligning with the Southeast Asian market's preference for durability and practicality. It's worth noting that while naturally aspirated engines aren't as powerful as turbocharged ones, their simpler structure, easier maintenance, and lower long-term running costs are part of why the Xpander remains popular in Malaysia.
Q
Is Xpander 2024 3 cylinder?
Based on the current information, the 2024 Mitsubishi Xpander available in the Malaysian market is equipped with a 1.5 - liter MIVEC four - cylinder naturally aspirated engine, not a three - cylinder configuration. This engine delivers 105 horsepower and 141 Nm of torque, paired with either a 5 - speed manual or a 4 - speed automatic transmission. It focuses on providing smoothness and fuel efficiency for the family car market. The doubts about a three - cylinder engine might stem from the fact that some brands have adopted three - cylinder technology in recent years for emission reduction purposes. However, the Xpander maintains a four - cylinder layout to ensure power stability. It's worth noting that although three - cylinder engines are smaller in size and more fuel - efficient, they usually require more advanced technical tuning for vibration suppression and high - speed performance. In contrast, the four - cylinder structure still has advantages in terms of durability and smoothness. Malaysian consumers can make their choices according to their own needs when purchasing. If they prioritize low fuel consumption and are open to new technologies, they can look into three - cylinder models from other brands. If they prefer a more mature powertrain, the four - cylinder configuration of the Xpander remains a reliable option. It is recommended to take test drives to experience the differences.
Q
What is the ground clearance of the Xpander 2024?
The 2024 Mitsubishi Xpander has a ground clearance of 205 millimeters. This figure is relatively high among compact MPVs and allows the vehicle to adapt well to Malaysia's diverse road conditions, including urban roads and the rough terrains in the suburbs. The high ground clearance not only improves the vehicle's passability but also reduces the risk of chassis scratches, especially on flooded roads that may occur during the rainy season in Malaysia. In addition to the ground clearance, the 2024 Xpander is also equipped with an optimized suspension system, which further enhances driving stability and comfort. For Malaysian consumers, this type of high - chassis MPV is very practical. It can meet the needs of family outings and handle complex road conditions. If you often need to carry passengers or cargo and also pay attention to the vehicle's passability, the 2024 Xpander would be a great choice. Its space performance and practicality are also worth noting.
Q
Is the 2024 Mitsubishi Xpander a MPV or SUV?
The 2024 Mitsubishi Xpander falls into the MPV (Multi-Purpose Vehicle) category rather than the SUV (Sport Utility Vehicle) category. Its original design aim was to meet the needs of family users for spacious interiors and comfortable riding experiences. It features a three - row seat layout and sliding side doors, which are typical characteristics of MPVs. The Xpander has a relatively high ground clearance and crossover - style exterior kits, making it look somewhat like an SUV. However, in essence, it remains an MPV focused on practicality and versatility. For consumers in Malaysia, the Xpander is an excellent family vehicle. It offers good comfort and convenience, whether for city driving or long - distance trips. The main differences between MPVs and SUVs lie in their body structures and uses. MPVs prioritize passenger space and cargo - loading flexibility, while SUVs emphasize off - road performance and driving visibility. Consumers can choose the appropriate model based on their actual needs. The Xpander has always been very popular in the Malaysian market because it combines practicality, economy, and reliability, making it a great fit for local road conditions and family - use scenarios.
Q
What is the fuel consumption of the 2024 Mitsubishi Xpander?
The 2024 Mitsubishi Xpander offers a moderate fuel economy. According to official data, its combined fuel consumption is approximately 6.5 to 7.2 liters per 100 kilometers. The exact figure may vary slightly depending on driving habits, road conditions, and vehicle configurations (such as the 2WD or 4WD versions). This model is equipped with a 1.5-liter MIVEC naturally aspirated engine, paired with a 4-speed automatic or 5-speed manual transmission. The power is tuned to meet the practical needs of families. For Malaysian users, the Xpander's fuel consumption is suitable for daily city commuting and medium - to short - distance trips, especially considering the common traffic congestion in the local area. It is recommended to perform regular maintenance (such as replacing the air filter and spark plugs) to optimize fuel efficiency. In addition, if you want to further reduce fuel consumption, you can try some fuel - saving driving techniques like smooth acceleration and reducing idling time. Similar models in the same class, such as the Toyota Avanza or Honda BR - V, have a comparable fuel economy. However, the Xpander has an edge in terms of space flexibility and cost - effectiveness, making it a great choice for family users who value practicality.
  • Popular Cars

  • Model Year

  • Car Compare

  • Car Photo

Pros

Spacious seating with flexible rear seats
Decent power with smooth transmission
Ample safety features for protection
Well-tuned suspension, stable ride
Practical interior with many cup holders

Cons

Third row space tight for taller passengers
Engine low torque, not very powerful
Infotainment screen could be larger
Older 4AT version less advanced in some markets

Latest Q&A

Q
What is the rule of thumb when replacing brake pads?
Brake pad replacement should be determined based on a comprehensive assessment of wear level, mileage, and abnormal indicators. New brake pads are approximately 15 millimeters thick and must be replaced when worn down to 3-5 millimeters remaining (about one-third of the original thickness). Some models also require immediate replacement when the wear limit indicator is engaged. Front brake pads typically require replacement every 30,000-50,000 kilometers, while rear brake pads need replacement every 60,000-100,000 kilometers. However, mountain driving or frequent hard braking can reduce this interval by 20-30%. Metallic scraping noises during braking, a spongy pedal feel, or increased stopping distance indicate hazardous wear requiring urgent attention. For premium vehicles, replacement is necessary when the wear warning light activates (threshold: 2.5-3 mm) or dashboard alerts appear. Regular brake pad inspections are recommended during every 5,000-kilometer service, with more frequent checks in humid climates. Simultaneously monitor brake disc condition (recommended replacement: one disc per two pad changes) to maintain braking system performance. Opting for OEM or ceramic composite brake pads enhances durability and noise reduction.
Q
What is the wear indicator on brake pads?
The brake pad wear indicator is a safety warning device installed on the brake pads, designed to alert the driver when the brake pads have reached the critical thickness requiring replacement. When the friction material wears down to 2-3 millimeters, the metal sensing wire contacts the brake disc, completing a circuit and activating the warning light on the dashboard (typically displayed as a circle with a semicircular surround). Some premium vehicles employ electronic wear sensors that trigger alerts based on resistance changes. Notably, inner brake pads generally wear faster than outer ones. It's recommended to inspect thickness every 5,000 kilometers or upon hearing metallic grinding noises. Immediate replacement is required if remaining thickness falls below 4 millimeters. Excessive brake pad wear can increase stopping distance by over 30% and potentially damage brake discs, resulting in approximately 500-800 MYR in additional repair costs. Always use OEM-matched brake pads during replacement to ensure proper braking system compatibility. Special tools must be used to reset the brake caliper to prevent guide pin damage. If driving with an illuminated warning light, limit travel to under 300 kilometers and avoid hard braking to prevent brake system failure.
Q
How many miles are brakes good for?
The lifespan of brake pads is typically 30,000 to 50,000 kilometers for the front wheels and 60,000 to 100,000 kilometers for the rear wheels. However, the actual wear rate is significantly affected by factors such as driving habits, road conditions, and vehicle load. Sudden braking, frequent braking, or driving in mountainous areas will accelerate wear, while smooth driving and highway driving can extend the service life. The material of the brake pads also plays a key role; ceramic brake pads are more wear-resistant than semi-metallic ones. It is recommended to check the thickness every 10,000 kilometers. When the remaining thickness is less than 3 millimeters or metallic friction noise occurs, immediate replacement is required. Some models are equipped with wear sensors, and the instrument panel will actively prompt for replacement. Note that long-term parking may cause aging of rubber components, so even if the thickness is sufficient, inspection should be performed after more than 5 years. Regular maintenance and reasonable driving habits are the core to ensuring braking safety.
Q
How do I know if my brake discs are worn?
To determine whether a brake disc is worn, a comprehensive assessment from multiple aspects is required. First, observe the thickness change: a new brake disc is approximately 1.5 cm thick, and it needs to be replaced when the wear reaches the edge mark (a reduction of about 2-3 mm) or when the total wear depth on both sides measured by a micrometer reaches 2 mm. Second, check the condition of the disc surface. Deep grooves, uneven wear, cracks, or deformation indicate potential safety hazards, particularly when brake pads are frequently replaced or the material is excessively hard, causing abnormal scratches on the disc surface. In terms of auditory cues, persistent harsh metal friction sounds when gently applying the brakes (excluding normal break-in noises) often indicate surface scratches or excessive wear. If the brake warning light illuminates on modern vehicle dashboards, or if vernier caliper measurements reveal wear indicator pits with a depth of 1.5 mm (corresponding to 3 mm total wear), immediate attention is required. Additionally, steering wheel vibration during braking or brake pad thickness below 1-2 mm suggests the brake disc may have reached its service limit. Professional inspection every 80,000-100,000 kilometers or during routine maintenance is recommended. A brake tester can precisely evaluate wear and flatness to ensure driving safety.
Q
What is the average lifespan of brake pads?
The average lifespan of brake pads varies depending on factors such as vehicle model, driving habits, and road conditions. Front brake pads typically last between 30,000 and 80,000 kilometers, while rear brake pads last around 60,000 to 120,000 kilometers. Driving habits have a significant impact on wear: frequent sudden braking or driving in congested urban areas shortens their lifespan, whereas smooth driving or high-speed driving can extend the service period. Vehicles with heavy loads or those driven in mountainous areas also experience accelerated wear. It is recommended to regularly check the thickness of the brake pads. New pads are approximately 1.5 centimeters thick; they should be replaced immediately when worn down to 0.3 centimeters or when an alarm is triggered (such as a metal friction sound or a dashboard warning). New energy vehicles may have longer brake pad lifespans due to the assistance of kinetic energy recovery systems. When replacing brake pads, it is advisable to choose original equipment manufacturer (OEM) quality products and note that a 200-kilometer break-in period is needed to ensure braking performance. For safety, inspect the condition of the brake pads every 10,000 kilometers and promptly address issues such as abnormal wear or increased braking distance.
View More