What's the size of the tank of the GS3?

Whether an 8-month oil change interval is too long should be comprehensively evaluated based on the specific vehicle condition and usage environment. If fully synthetic oil is used with an annual mileage below 10,000 kilometers, an 8-month interval falls within the reasonable range (typically, fully synthetic oil is recommended for replacement every 1 year or 10,000 kilometers); however, for semi-synthetic oil, this approaches the upper limit (7-8 months recommended), while mineral oil would already exceed the recommended period (6 months recommended). Three scenarios require particular attention: first, frequent short trips (single trip <5 km) or prolonged stop-and-go traffic conditions, where insufficient engine warm-up may lead to oil emulsification, warranting a 30% reduction in the interval; second, older vehicles (over 8 years) experience accelerated oil degradation due to component wear, necessitating replacement 20% earlier in either mileage or time; third, extreme climates (such as high-temperature/dusty environments or prolonged cold conditions)—high temperatures accelerate oxidation, requiring a shortened interval to 8,000 km, while dusty conditions call for a 15% reduction. Additionally, the oil filter must be replaced with every oil change to prevent contamination of fresh oil by residual impurities. Oil test paper analysis is recommended; immediate replacement is required if the boundary between the diffusion ring and deposit ring appears blurred or dark brown. New vehicles during break-in periods or used cars should adhere more strictly to maintenance manuals—typically, the initial oil change during break-in should occur at 2,500-3,000 km. For turbocharged models, given their higher operating temperatures, even with full synthetic oil, replacement within 10 months is advisable. Vehicles parked over 3 months require oil condition inspection, while those idle beyond 1 year mandate compulsory oil replacement.

Yutong Bus Co., Ltd. is a bus manufacturing enterprise headquartered in Zhengzhou City, Henan Province, China. Its predecessor was the state-owned Zhengzhou Bus Repair and Assembly Factory, established in 1963. After several restructurings, the company was formally established in 1993 and became the first listed large bus manufacturer in China in 1997. Currently, the company is primarily operated by Yutong Group, which is effectively controlled by its founder Tang Yuxiang, and operates as a private enterprise. Its core business encompasses the R&D and manufacturing of a full range of buses, including intercity coaches, transit buses, tour buses, and school buses. The company operates four vehicle assembly plants and seven national-level innovation platforms, with an annual production capacity of 80,000 units. As the global sales leader in bus manufacturing, Yutong has maintained the top market share in the large and medium-sized bus segment for 22 consecutive years. Its cumulative sales of new energy buses have surpassed 196,000 units, with products exported to over 60 countries and regions. In 2024, global sales reached 46,918 units, and the company ranked 375th on the 2025 Fortune China 500 list. The company demonstrates exceptional technical capabilities, having introduced the world's first autonomous bus, contributed to the development of national school bus standards, and spearheaded the establishment of the Hydrogen Energy and Fuel Cell Vehicle Industry Research Institute. Its brand value stands at 110.846 billion ringgit (approximately 7.736 billion yuan). The company has also established a sales network in Malaysia, primarily supplying vehicles for public transportation, tourism, and airport shuttle services.

Yutong Bus excels in reliability, with its core advantages reflected in low failure rates and long-term durability. According to industry feedback, the annual average number of failures of Yutong buses is significantly lower than that of comparable models, and their body structures can maintain stable performance for over 10 years—a critical factor for passenger transport operators prioritizing fleet availability. Its company-owned service network enables rapid response to breakdown repairs, substantially reducing vehicle downtime compared to brands relying on dealerships, thereby safeguarding operator profitability. On the technical front, Yutong employs high-strength body designs and premium component supply chains, complemented by active safety systems including ABS and ESP, which enhance driving safety while decreasing maintenance frequency. In practical operations, drivers consistently report Yutong's superior stability and handling at highway speeds compared to peer products, with this differentiated driving experience fostering brand loyalty. From a total cost of ownership perspective, although Yutong commands higher initial purchase prices, its overall operational efficiency proves more competitive through lower fuel consumption rates, reduced maintenance expenses, and higher residual values. Currently maintaining dominant market share domestically, Yutong's comprehensive product portfolio addressing urban transit, intercity coach services, and other mobility needs further validates its reliability as an industry-acclaimed standard.

As a leading global bus manufacturer, Yutong Bus excels in technology R&D, market layout, and product reliability, making it a trustworthy automotive brand. Its core advantages lie in the three-electric technology sector. The long-life battery system and three-gun flash charging technology, co-developed with CATL, have significantly enhanced the range and operational efficiency of new energy buses. With a battery energy density of 175Wh/kg and a range exceeding 500 kilometers, these technical indicators position the company at the industry's forefront. In overseas markets, Yutong has implemented technology exports to over ten countries, including Malaysia, through its KD localization cooperation model. In 2024, its export sales reached 14,000 units, marking a 37.73% year-on-year increase and sustaining high growth for three consecutive years. Overseas business revenue now accounts for 43.2% of total revenue, underscoring the adaptability and competitiveness of its products. Additionally, Yutong has established a global after-sales network with a 150-kilometer service radius and set up central spare parts warehouses in key markets to ensure rapid service response. Financially, the net profit attributable to the parent company in 2024 is projected to reach 4.045 billion ringgit (based on current exchange rates), surpassing previous records and demonstrating the brand's robust operational performance. For Malaysian users, Yutong's new energy buses have already been deployed in large-scale operations locally. Their low failure rate, high comfort, and intelligent management systems (such as the Anruitong intelligent dispatching platform) effectively meet the demands of public transportation, tourism, and other applications, making them an excellent choice that balances environmental sustainability and practicality.

Yutong Bus primarily utilizes a range of high-performance diesel and natural gas engines in the Malaysian market to meet the operational requirements of different vehicle models. For instance, the ZK6109H series is equipped with engines including WP7.270E51, YC6A270-50, and YC6L280-50 models, featuring a rated power output ranging from 199kW to 206kW. These engines comply with China National V emission standards while balancing power performance and environmental considerations. The ZK6122HN series employs the WP10NG336E40 natural gas engine with LNG fuel technology, achieving a fuel consumption of approximately 22 liters per 100 kilometers and equipped with a 450-liter gas tank capacity, making it ideal for long-distance passenger transport needs. Yuchai engines serve as one of Yutong's core power sources. The National VI-compliant models, through optimized combustion systems and lightweight design, not only exceed regulatory emission standards by 30% but also enhance downhill safety via cylinder braking technology. Additionally, certain Yutong models like the ZK6107H offer diverse engine options such as YC6J245-30 or ISDe245 30, catering to the power-to-cost ratio requirements of different bus classes. All these engines emphasize low-noise and low-vibration designs, incorporating NVH silencing technology and suspended exhaust systems to ensure passenger comfort. Features like real-time fuel consumption display further assist drivers in optimizing fuel efficiency.