Q

How to replace the wiper blades of Kia Cerato ?

To replace the wiper blades on your Kia Cerato, you can follow these steps: first, lift the wiper arm so that it separates from the windshield. Then press or twist the fixation device at the connection of the wiper blade, and pull out the old wiper blade. Next, align the new wiper blade with the slot and insert it, making sure the fixation device is locked in place. Finally, lower the wiper arm. Please note that you should proceed gently to avoid damaging any vehicle parts.
Special Disclaimer: This content is published by users and does not represent the views or position of PCauto.

Related Q&A

Q
How to open Kia Cerato's trunk without a key?
The most common way to open Kia Cerato's trunk without using a key is via the interior trunk release button, typically located near the driver's seat - such as on the driver-side door control panel. Some models may also feature a smart trunk release function that automatically unlocks when the key fob is detected within a certain proximity of the rear bumper. Please note that specific operation methods may vary depending on the vehicle's configurations.
Q
How to reset the maintenance reminder of Cerato?
To reset the maintenance reminder on the Kia Cerato, usually you can follow these steps: first, place the ignition in the ON position, but do not start the engine. Then locate the Trip button on the dashboard and hold it down until the maintenance reminder starts to flash. Next, continue to hold the Trip button for a few seconds until the maintenance reminder turns off. Models of different years and configurations of the Kia Cerato may have slight differences. If the above method is not applicable, it is recommended to consult your local Kia car dealer.
Q
How to change the headlight bulb of Kia Cerato?
To replace the headlight bulb of a Kia Cerato, first ensure the vehicle is turned off and cooled down. Open the vehicle's hood, and locate the back cover of the headlight assembly. Unscrew the back cover and carefully remove the bulb plug. Release the bulb retaining spring, and remove the old bulb. Install the new bulb into the socket, secure the spring, and plug in the plug. Finally, close the back cover. Be careful not to dirty the surface of the bulb during operation to avoid affecting the lighting effect.
Q
How to start Kia Cerato with key?
To start the Kia Cerato using a key, first insert the key into the ignition. Then, ensure the vehicle is in park (P). Press the brake pedal, then turn the key clockwise to the "START" position. Hold for a moment and release the key once the engine starts. It's important to check for any obstacles around the vehicle and to ensure all instrument panel displays are functioning properly before starting.
Q
How to replace the rear windshield wiper on Kia Cerato?
To replace the rear windshield wiper on a Kia Cerato, first lift the wiper arm so that it is perpendicular to the windshield. Then, press the button at the connection between the wiper blade and the wiper arm, and pull out the old wiper blade. Next, align the slot of the new wiper blade with the hook on the wiper arm, insert it and ensure it is secure. Finally, lower the wiper arm to complete the replacement.
Q
How much is a Kia Cerato hatch?
The 2024 Kia Cerato hatchback is priced between approximately RM 86,591 and RM 115,642. Prices vary across different trim levels; for instance, the 1.6L model comes in at a relatively lower price, while the 2.0L variant is priced slightly higher. However, it's important to note that the specific pricing may fluctuate due to factors such as dealership variances, regional differences, and market supply and demand.
Q
What size of wiper blade does the Kia Cerato require?
The common size of wiper blade for Kia Cerato is usually 24 inches and 16 inches for the front windshield. However, please note that there may be slight differences for different years and configurations of models.
Q
How to replace rear windshield wiper?
The steps to replace the rear windshield wiper on a car are as follows: First, raise the rear wiper arm, press the button or latch on the wiper blade, then pull out the old wiper blade directly along the direction of the wiper arm. Next, align the new wiper blade with the slot of the wiper arm and insert it, making sure it is firmly installed. Be mindful of the force you use during this process to avoid damaging the wiper arm and related parts. There may be subtle differences for different car models. For example, some models' rear wiper arms may require special tools or specific methods for disassembly and installation.
Q
How do you lift the wipers on a Kia Cerato?
To lift the wipers on a Kia Cerato, you can typically do as follows: first, turn off the vehicle's ignition. Then, within 10 seconds, pull the windshield wiper lever towards the direction of steering wheel , and the wipers will move to the maintenance position. At this point, you can easily lift the wiper blades.
Q
How to replace the rear wiper blade on a Kia?
To replace the rear wiper blade on a Kia vehicle, follow these steps: first, lift the rear wiper arm to a 90-degree angle from the rear windshield. Next, press the button or clip located at the connection point between the wiper blade and the arm while pushing the blade along the direction of the arm to remove it. After that, align the new wiper blade with the slot on the wiper arm and gently push it in until you hear a click, indicating it's securely in place. Finally, lower the wiper arm and check that the new blade is firmly installed and functions properly. It's important to note that the replacement method may vary slightly among different Kia models.

Pros

Smooth exterior design
Fine assembly craftsmanship

Cons

The interior style is old-fashioned

Latest Q&A

Q
Does Tiguan 2018 have a 360 camera?
Whether the 2018 Volkswagen Tiguan is equipped with a 360-degree surround-view camera system in the Malaysian market depends on the specific model and configuration level. Usually, high-end versions such as the Tiguan Highline or R-Line may come with this feature, while the entry- level versions may not have it as standard. The 360-degree surround-view camera synthesizes a bird's-eye view through multiple cameras, helping drivers better and more intuitively understand the surrounding environment in narrow spaces or when parking. This technology has gradually become popular in mid-to high-end SUVs in recent years. If you're considering buying a used 2018 Tiguan, it's recommended to check the specific configuration with the original manufacturer or an authorized dealer using the vehicle's VIN code, or actually check if there's an "Area View" function option in the central control system. For owners who value convenience, if the original vehicle isn't equipped with this system, a third-party surround-view system can be added through the aftermarket. However, pay attention to compatibility and warranty terms. Similar models in the same class, like the Mazda CX-5 or Honda CR-V in similar model years, may also offer similar features in their high - end versions. It's advisable to make comprehensive comparisons before purchasing a car.
Q
How to connect Apple CarPlay to Tiguan 2018?
To connect Apple CarPlay on the 2018 Tiguan, first make sure your iPhone is running a relatively new version of the iOS system. Then, use the original Lightning cable to connect your phone to the vehicle's USB port, which is usually located under the center console or inside the armrest box. Next, select the "App-Connect" or "Apple CarPlay" option in the Tiguan's infotainment system, and allow CarPlay access on your iPhone to complete the connection. If you encounter problems, you can try restarting your phone or the vehicle system and check if the cable is in good condition. It's worth mentioning that Apple CarPlay not only supports navigation and music playback but also enables voice control via Siri, enhancing driving safety. Meanwhile, users in Malaysia need to pay attention to local network compatibility. Some apps like Google Maps or Waze may require a stable network connection to function optimally. If your vehicle doesn't come pre - installed with CarPlay, you can consult a Volkswagen authorized dealer to upgrade the software or hardware. However, you need to confirm the compatibility to avoid additional costs.
Q
Does a 2018 VW Tiguan have a catalytic converter?
The 2018 Volkswagen Tiguan is indeed equipped with a catalytic converter, which is a standard emission control component in modern gasoline and diesel vehicles. It's used to convert harmful exhaust gases such as hydrocarbons, carbon monoxide, and nitrogen oxides into relatively harmless substances like carbon dioxide, nitrogen, and water vapor to meet strict environmental protection regulations. In Malaysia, all imported and locally assembled vehicles must comply with local emission standards. So, as a global model, the 2018 Tiguan naturally comes with this crucial component. The catalytic converter is usually located in the middle section of the exhaust system, close to the engine, to ensure that the exhaust gases can undergo chemical reactions more effectively at high temperatures. It should be noted that the lifespan of the catalytic converter can be affected by fuel quality, driving habits, and maintenance conditions. If the vehicle experiences a loss of power or the emission warning light comes on, it may indicate a problem with the catalytic converter. It's recommended to have it checked promptly to avoid further damage. Moreover, Malaysia has a rather special climate and road conditions. The hot and humid environment may accelerate the corrosion of the exhaust system. Therefore, regular maintenance and inspection of the exhaust system are particularly important for extending the lifespan of the catalytic converter.
Q
What is the engine capacity of the VW Tiguan 2018?
The 2018 Volkswagen Tiguan available in the Malaysian market mainly offers two turbo-charged gasoline engines: the 1.4-liter TSI and the 2.0-liter TSI. The 1.4-liter version has a maximum power output of 150 horsepower, while the 2.0-liter version comes with different tunings, offering 180 horsepower or 220 horsepower (in the high-performance R-Line version). These engines are well-known for their high performance and fuel efficiency, making them suitable for the mixed driving conditions in Malaysian cities and on long-distance trips. The Tiguan is built on the MQB platform technology, which optimizes the vehicle's weight and interior space layout. It is also equipped with a DSG dual-clutch transmission, providing smooth gear shifts and quick responses. For Malaysian consumers, the turbo-charging technology can effectively counter the impact of the tropical climate on the vehicle's power, and Volkswagen's after-sales network ensures convenient vehicle maintenance. If you're considering a used car or thinking about maintenance, it is recommended to regularly check the turbo system and the transmission fluid. These small-displacement turbo engines can maintain long-term reliability when properly maintained, and Volkswagen dealerships in Malaysia usually offer original factory maintenance packages.
Q
What kind of gas does the 2018 Tiguan take?
The 2018 Volkswagen Tiguan is recommended to use RON 95 unleaded gasoline in Malaysia. This is the most common type of fuel locally and can fully meet the requirements of the vehicle's 1.4-liter TSI or 2.0-liter TSI turbocharged engines. Meanwhile, it complies with the fuel standards set by the Malaysian government. Although some high-performance models may require RON 97 for better power performance, the Tiguan can perform normally with RON 95 as per the factory settings, and it's more cost - effective. Malaysian car owners should note that the main difference between gasoline with different RON values lies in their anti - knock capabilities. RON 95 can effectively prevent engine knocking, while RON 97 is more suitable for engines with a higher compression ratio. It is recommended to have regular maintenance at authorized service stations and use the fuel additives recommended by the manufacturer to keep the fuel system clean. This can extend the engine's lifespan and maintain fuel efficiency. Additionally, due to the hot and humid climate in Malaysia, try to avoid running the fuel tank completely empty before refueling to prevent condensed water from mixing into the fuel system.
View More