Q
What fuel does the Kia Cerato use?
Kia Cerato typically uses gasoline as its fuel. The common Kia Cerato models are often compatible with gasoline grades of RON 95 or above. However, specific fuel requirements may vary depending on the vehicle configuration and engine technology.
Special Disclaimer: This content is published by users and does not represent the views or position of PCauto.
Related Q&A
Q
How to open Kia Cerato's trunk without a key?
The most common way to open Kia Cerato's trunk without using a key is via the interior trunk release button, typically located near the driver's seat - such as on the driver-side door control panel. Some models may also feature a smart trunk release function that automatically unlocks when the key fob is detected within a certain proximity of the rear bumper. Please note that specific operation methods may vary depending on the vehicle's configurations.
Q
How to reset the maintenance reminder of Cerato?
To reset the maintenance reminder on the Kia Cerato, usually you can follow these steps: first, place the ignition in the ON position, but do not start the engine. Then locate the Trip button on the dashboard and hold it down until the maintenance reminder starts to flash. Next, continue to hold the Trip button for a few seconds until the maintenance reminder turns off. Models of different years and configurations of the Kia Cerato may have slight differences. If the above method is not applicable, it is recommended to consult your local Kia car dealer.
Q
How to change the headlight bulb of Kia Cerato?
To replace the headlight bulb of a Kia Cerato, first ensure the vehicle is turned off and cooled down. Open the vehicle's hood, and locate the back cover of the headlight assembly. Unscrew the back cover and carefully remove the bulb plug. Release the bulb retaining spring, and remove the old bulb. Install the new bulb into the socket, secure the spring, and plug in the plug. Finally, close the back cover. Be careful not to dirty the surface of the bulb during operation to avoid affecting the lighting effect.
Q
How to start Kia Cerato with key?
To start the Kia Cerato using a key, first insert the key into the ignition. Then, ensure the vehicle is in park (P). Press the brake pedal, then turn the key clockwise to the "START" position. Hold for a moment and release the key once the engine starts. It's important to check for any obstacles around the vehicle and to ensure all instrument panel displays are functioning properly before starting.
Q
How to replace the rear windshield wiper on Kia Cerato?
To replace the rear windshield wiper on a Kia Cerato, first lift the wiper arm so that it is perpendicular to the windshield. Then, press the button at the connection between the wiper blade and the wiper arm, and pull out the old wiper blade. Next, align the slot of the new wiper blade with the hook on the wiper arm, insert it and ensure it is secure. Finally, lower the wiper arm to complete the replacement.
Q
How much is a Kia Cerato hatch?
The 2024 Kia Cerato hatchback is priced between approximately RM 86,591 and RM 115,642. Prices vary across different trim levels; for instance, the 1.6L model comes in at a relatively lower price, while the 2.0L variant is priced slightly higher. However, it's important to note that the specific pricing may fluctuate due to factors such as dealership variances, regional differences, and market supply and demand.
Q
What size of wiper blade does the Kia Cerato require?
The common size of wiper blade for Kia Cerato is usually 24 inches and 16 inches for the front windshield. However, please note that there may be slight differences for different years and configurations of models.
Q
How to replace rear windshield wiper?
The steps to replace the rear windshield wiper on a car are as follows: First, raise the rear wiper arm, press the button or latch on the wiper blade, then pull out the old wiper blade directly along the direction of the wiper arm. Next, align the new wiper blade with the slot of the wiper arm and insert it, making sure it is firmly installed. Be mindful of the force you use during this process to avoid damaging the wiper arm and related parts. There may be subtle differences for different car models. For example, some models' rear wiper arms may require special tools or specific methods for disassembly and installation.
Q
How do you lift the wipers on a Kia Cerato?
To lift the wipers on a Kia Cerato, you can typically do as follows: first, turn off the vehicle's ignition. Then, within 10 seconds, pull the windshield wiper lever towards the direction of steering wheel , and the wipers will move to the maintenance position. At this point, you can easily lift the wiper blades.
Q
How to replace the rear wiper blade on a Kia?
To replace the rear wiper blade on a Kia vehicle, follow these steps: first, lift the rear wiper arm to a 90-degree angle from the rear windshield. Next, press the button or clip located at the connection point between the wiper blade and the arm while pushing the blade along the direction of the arm to remove it. After that, align the new wiper blade with the slot on the wiper arm and gently push it in until you hear a click, indicating it's securely in place. Finally, lower the wiper arm and check that the new blade is firmly installed and functions properly. It's important to note that the replacement method may vary slightly among different Kia models.
Latest Q&A
Q
Can you program a 2018 VW Jetta at home?
Regarding the programming issues of the 2018 Volkswagen Jetta, it's possible to do the programming at home, but it requires professional equipment and knowledge. Usually, it's recommended to use the official or certified ODIS (Offboard Diagnostic Information System) software in conjunction with the VAS diagnostic tool. These tools can access the vehicle's ECU (Electronic Control Unit) for coding or adaptation, such as adjusting the lighting settings, start - stop function, or instrument display. However, for critical programming related to the engine, transmission, or safety system, it's advisable to go to an authorized service center, as improper operation may lead to system malfunctions or affect the warranty.
In Malaysia, many professional auto repair shops or modification studios also offer such services at relatively reasonable prices. If you lack experience, seeking professional help is safer. Moreover, before programming, make sure the vehicle's battery voltage is stable to avoid system errors caused by interruptions. Also, some functions may be restricted by local regulations, and you need to comply with the rules of JPJ (Malaysian Road Transport Department) during modification.
If you want to learn more about automotive electronic systems, you can study the basic principles of the OBD - II interface, which is the foundation for modern vehicle diagnosis and programming. But always remember that complex operations still require the assistance of professionals.
Q
Does the 2018 Jetta have Apple CarPlay?
The 2018 Volkswagen Jetta is indeed equipped with Apple CarPlay. This feature allows drivers to seamlessly connect their iPhones to the car's infotainment system, enabling them to use common apps such as navigation, music, and calls, thereby enhancing driving convenience and entertainment experience. This function is especially useful for Malaysian users. Given the complex local traffic conditions, real - time navigation and hands - free calling can significantly improve driving safety.
In addition to Apple CarPlay, the 2018 Jetta may also support Android Auto to meet the needs of different smartphone users. Its infotainment system usually integrates functions such as Bluetooth connectivity, USB ports, and voice control, further enhancing the vehicle's technological appeal.
It should be noted that the specific functions may vary slightly depending on the vehicle configuration or regional versions. It is recommended to confirm the detailed specifications with local dealers before purchasing a car. Meanwhile, the hot and humid climate in Malaysia places certain requirements on the durability of in - vehicle electronic devices. Regular maintenance and avoiding long - term exposure to sunlight can help extend the system's lifespan.
Q
What is the safety rating of the 2018 Volkswagen Jetta?
The 2018 Volkswagen Jetta has a strong safety performance record. It received high ratings in multiple Insurance Institute for Highway Safety (IIHS) crash tests, including 'Good' scores in the moderate overlap front and side impact tests. Its performance was particularly strong in the moderate overlap front test, side impact test, and it maintained good structural integrity in the small overlap frontal tests. It typically came standard with essential active safety features such as electronic stability control (ESC) and an anti-lock braking system (ABS). For Malaysian consumers, while the exact standard safety features may vary slightly from the U.S. market specifications, the Jetta's core safety engineering and design are robust and trustworthy. This includes features like a high-rigidity passenger safety cell and multiple airbags (often including front, side, and curtain airbags depending on the trim level). It is important to note that official safety ratings (like IIHS or ASEAN NCAP) can vary based on specific market configurations and the testing protocols of different agencies. Therefore, it is highly recommended to consult the ASEAN NCAP safety ratings or local Malaysian safety evaluations for the most relevant information before purchase. Beyond the vehicle's inherent safety features, consumers should also prioritize regular maintenance and tire condition, as these are critical factors for real-world safety. Ultimately, even the most advanced safety systems require responsible driving habits to achieve their full protective potential.
Q
What motor is in a 2018 Volkswagen Jetta?
In 2018, the Volkswagen Jetta in the Malaysian market was mainly equipped with a 1.4-liter TSI turbocharged four-cylinder gasoline engine. This engine uses direct injection technology, with a maximum output power of 150 horsepower and a peak torque of 250 Newton-meters. It is paired with a 6-speed manual or 8-speed automatic transmission, providing a smooth driving experience and good fuel economy.
This engine belongs to Volkswagen's EA211 series and is known for its lightweight design and high efficiency. It is suitable for both city commuting and long-distance driving. It's worth mentioning that the turbocharging technology can provide abundant torque at low speeds, making overtaking easier. At the same time, the TSI engine also takes environmental protection into account and meets the Euro 6 emission standards.
For Malaysian consumers, the power of the 1.4 TSI is more than enough. Moreover, the maintenance cost is relatively reasonable, and the parts supply is also abundant. Among vehicles in the same class, small-displacement turbocharged engines like this have become a trend. They can not only meet the power requirements but also reduce the road tax burden, which is very suitable for the road conditions and vehicle usage environment in Malaysia.
Q
How do I turn off the inspection light on my VW Jetta 2018?
To turn off the check light on the 2018 Volkswagen Jetta, you can follow these steps: First, make sure the vehicle is turned off. Then, press and hold the "0.0" button on the dashboard (on some models, it might be the "SET" or "Reset" button). Next, turn the ignition switch to the "ON" position (without starting the engine). Keep holding the button until the dashboard shows a prompt like "Are you sure you want to reset the maintenance service data?" or something similar. Finally, release the button and press it briefly again to confirm and complete the reset.
It's important to note that Jettas from different years or with different configurations may have slight differences in the operation details. It's recommended to refer to the vehicle's user manual to confirm the specific steps. For Malaysian car owners, regular maintenance is crucial because the high temperature and humidity in the tropical climate can accelerate the aging of vehicle components. Resetting the maintenance light in a timely manner not only ensures the normal operation of the reminder function but also helps maintain the vehicle in its optimal condition.
If the check light still stays on after you've done the reset yourself, it's possible that the vehicle has detected other system issues that need attention. In this case, it's advisable to contact a Volkswagen - authorized repair center as soon as possible for professional diagnosis to avoid affecting driving safety.
View MoreRelated News

Kia Sportage: Superior Suspension for Smooth Ride
Kevin WongMay 19, 2025

Kia Carnival: Spacious & Versatile for Every Journey
Kevin WongMay 19, 2025

Kia reveals all details of PV5, with a maximum range of up to 400 kilometers
LienMar 11, 2025

173L cargo box, 3500kg towing capacity, KIA Tasman meets all your needs!
MichaelOct 31, 2024

The interior of Kia's brand new pure electric sedan EV4 is exposed, expected to debut in mid-2025
MichaelOct 9, 2024
View More
Pros
Cons