2018 Perodua Axia SE 1.0 AT

As one of the best-selling car models in Malaysia, the Perodua Myvi is well - known for its affordability and low fuel consumption. However, there are also some common issues reported by car owners that need attention. For example, the CVT transmissions in some early models may experience a jerking sensation after long - term use. It is recommended to check the status of the transmission fluid during regular maintenance. Although the 1.3L and 1.5L engines are durable, they may show a slight oil consumption phenomenon after high mileage. Therefore, regular replacement of synthetic oil is necessary. In addition, the body's sound insulation effect is a bit lacking when driving at high speeds. This is a common characteristic of economy cars in the same class, and it can be improved by later installing sound - insulating materials. The electronic power steering system is quite light, but a few car owners have reported that the power assistance may temporarily weaken in extremely hot weather, which usually recovers after restarting the vehicle. It's worth noting that the Myvi has always maintained a high resale value in the Malaysian second - hand car market. Spare parts are abundantly supplied and the prices are quite reasonable. The ease of maintenance far exceeds that of many imported models in the same class. For young families with limited budgets or first - time car buyers, the Myvi is still an outstanding choice in terms of cost - effectiveness. It is recommended that potential buyers test - drive second - hand models of different years according to their own needs. Pay special attention to checking the suspension system and the air - conditioning's cooling effect, as these are common wear - and - tear points for second - hand cars. Generally speaking, as long as the official recommended maintenance is carried out on time, the Myvi's reliability performance is still among the best in its class.

The tire sizes of different yearly models and variants of the Perodua Myvi vary. Among them, for the 1.3 G and 1.3 G with PSDA models from 2020 to 2023, as well as the relevant 1.3 G MT and 1.3 G AT models from 2018 to 2022, both the front and rear tire specifications are 175/65 R14, and the spare tire specification is Full Size (some early - models have non - full spare tires). For the 1.5 X, 1.5 H, and 1.5 AV models from 2020 to 2023, as well as the relevant 1.5 H AT and 1.5 AV AT models from 2018 to 2022, the front and rear tire specifications are both 185/55 R15, and the spare tire specification is Full Size. Tire size has an impact on the vehicle's handling, stability, and comfort. For example, wider tires may provide better grip but could also increase fuel consumption. When replacing tires, it's necessary to choose the appropriate specifications for the vehicle.

The Perodua Myvi is one of the most popular national cars in Malaysia, produced by the local automotive brand Perodua. Since its launch in 2005, it has become the top - choice vehicle for many families thanks to its affordable price, reliable performance, and practical design. The Myvi is equipped with either a 1.3L or a 1.5L engine, offering good fuel economy, which makes it perfect for urban commuting. Meanwhile, its compact and agile body allows it to easily maneuver on narrow roads, yet surprisingly, it has a spacious interior to meet the daily needs of carrying passengers and cargo. The latest generation of the Myvi is also equipped with advanced safety features such as ABS, EBD, and multiple airbags. Some high - end versions even come with the ASA active safety system, enhancing driving safety. As a small car focusing on cost - effectiveness, the Myvi has long been among the top - selling models in the Malaysian market. This is not only due to its affordable price but also because of Perodua's comprehensive after - sales service network and low maintenance costs, making it an ideal choice for many first - time car buyers. In addition, the Myvi has a rich modification culture. Many car owners like to show their personalities through exterior or performance modifications, which also gives the Myvi a unique position in the local automotive culture.

To calculate the loan for the Perodua Myvi, you can follow these steps. First, determine the car price. The prices vary depending on different models and configurations. For example, the price of the 2023 Perodua Myvi 1.3 G is RM 48,500, while the 1.5 AV is RM 59,900. Next, clarify the loan amount. Usually, you need to pay a certain percentage as a down payment. Suppose the down - payment percentage is 10%. If the car price is RM 50,000, the down payment will be RM 5,000, and the loan amount will be RM 45,000. Then, find out the loan interest rate. This is determined by the lending bank and your credit status, etc. The interest rates fluctuate among different banks and periods. Let's assume the loan interest rate is 3%. After that, decide on the loan term. Common loan terms are 5 years, 7 years, or 9 years. Different terms result in different repayment pressures and total interest amounts. With all this information, you can use a formula to calculate the monthly repayment amount under the equal - principal - plus - interest repayment method: Monthly repayment amount = [Loan principal×Monthly interest rate×(1 + Monthly interest rate)×Number of repayment months]÷[(1 + Monthly interest rate)×Number of repayment months - 1]. You can also use an online loan calculator or the one provided by the bank. For example, if the car price is RM 50,000, the down payment is 10% (RM 5,000), the loan amount is RM 45,000, the interest rate is 3%, and the loan term is 5 years (60 months), you can substitute these values into the formula to calculate the monthly repayment amount.

As one of the most popular national cars in Malaysia, the top speed of the Perodua Myvi varies depending on the model and engine configuration. The Myvi equipped with 1.3 - liter and 1.5 - liter engines can reach a top speed of approximately 170 km/h and 180 km/h respectively. The actual performance may vary slightly due to factors such as driving conditions, vehicle load, and road conditions. The Myvi is well - known for its nimble handling and fuel economy, making it an ideal choice for city commuting. Although top speed isn't its main selling point, it can easily meet the needs of daily driving. For car owners who seek higher performance, Perodua also offers the limited - edition Myvi R3 with a sporty tune, which further optimizes the power and suspension systems. It's worth noting that the speed limit on Malaysian highways is generally 110 km/h. So, even if the Myvi can achieve higher speeds, please abide by traffic rules to ensure driving safety. Additionally, regular maintenance of your vehicle, such as checking tire pressure, engine oil, and the braking system, can help keep your car in its best performance state.

As one of the most popular national cars in Malaysia, the monthly installment of the Perodua Myvi varies depending on factors such as the model, loan term, down - payment ratio, and interest rate. Take the 1.5L AV model as an example. If the car price is about RM50,000, and you take a 90% loan to be repaid over 7 years, based on the current average bank interest rate of 3%, the monthly installment will be around RM650. The exact amount needs to be finally confirmed according to your personal financial situation and the bank's plan. It's worth noting that the Myvi is a high - value choice with its low fuel consumption, high resale value, and comprehensive safety features (such as the ASA Advanced Safety Assist system). It is recommended that you obtain the latest promotional information through the Perodua official website or authorized dealers before buying a car, like zero down - payment or low - interest offers. At the same time, you can compare loan plans from different banks. Some institutions offer flexible repayment or early - settlement incentives. Additionally, you need to budget for long - term ownership costs such as insurance, road tax, and regular maintenance to ensure a more comprehensive financial plan.

The Perodua Myvi is a popular Class B car among Malaysian consumers. It comes in various models, all equipped with naturally aspirated engines, offering two displacement options: 1.3L and 1.5L. The 1.3L engine has a displacement of 1329 mL, with a maximum horsepower of 95 PS. The maximum power speed is 6000 rpm, and the maximum torque speed is 4000 rpm. The 1.5L engine has a displacement of 1496 mL, a maximum horsepower of 103 PS, a maximum power of 76 kw. The maximum power speed is 6000 rpm, the maximum torque is 137 N·m, and the maximum torque speed is 4200 rpm. In terms of body specifications, it is 3895 mm long, 1735 mm wide, and 1515 mm high, with a wheelbase of up to 2500 mm, providing a relatively comfortable interior space. The vehicle weight ranges from 985 - 1025 kg. The car has 4 doors and 5 seats, with a fuel tank capacity of 36 L and a trunk capacity of 277 L. Its transmission type is CVT, and the driving mode is front - wheel drive. The front suspension uses a MacPherson independent suspension, and the rear suspension is a torsion beam independent suspension. The front brakes are ventilated disc brakes, the rear brakes are drum brakes, and the parking brake type is manual. Regarding tire specifications, the front and rear tires of the 1.3L model are 175/65 R14, and those of the 1.5L model are 185/55 R15. Moreover, all models are equipped with full - size spare tires. In terms of safety features, ABS anti - lock brakes, vehicle stability control, and seat - belt reminder are standard. Some models are equipped with 4 airbags, while others have 6. The comfort and technology features are also quite rich. For example, a multi - function steering wheel, manual air - conditioning, and LED headlights are all standard. In addition, some models are also equipped with active safety systems such as automatic emergency braking and lane departure warning, as well as convenience features like automatic headlights and power - folding rear - view mirrors.

The Perodua Myvi is a popular Class B car, and its price varies depending on different models and configurations. The price range of the 2023 Perodua Myvi series is from 46,500 to 59,900 Malaysian Ringgit. Specifically, the 2023 Perodua Myvi 1.3 G (with PSDA) is priced at 46,500 Ringgit, the 1.3 G version at 48,500 Ringgit, the 1.5 X version at 50,900 Ringgit, the 1.5 H version at 54,900 Ringgit, and the 1.5 AV version at 59,900 Ringgit. This model strikes a good balance between an affordable price and practical functions. It features things like a high - performance engine, a comfortable interior, and a variety of safety configurations. Multiple configuration levels offer consumers diverse choices. Whether you focus on basic functions or pursue more high - end configurations and a comfortable experience, you can find a suitable version according to your own needs and budget.

The Perodua Myvi offers Malaysian consumers five classic and practical car body color options, each of which perfectly suits the positioning of this national car. The rich Cranberry Red is full of passion and vitality, making it especially suitable for young car owners who pursue personal expression. The bright Electric Blue shows a modern and sporty style. The neutral and understated Granite Grey presents a mature and steady temperament. The pure Ivory White gives people a clean and elegant visual experience. The classic Glittering Silver with a sparkly powder paint job shines brightly in the sun, being both business - like and fashionable. These colors are carefully formulated to perfectly showcase the dynamic and streamlined body shape of the Myvi. At the same time, considerations have been made for durability and ease of maintenance in Malaysia's hot climate. Vivid colors like Cranberry Red and Electric Blue are very popular among young consumers, while Granite Grey and Ivory White are more suitable for car buyers who prefer a steady - going style. The diverse color options of the Myvi enable it to meet the different tastes and needs of various consumer groups in Malaysia.

The Perodua Myvi, a hatchback vehicle belongs to the B-segment. It has a body length of 3,895mm, a width of 1,735mm, a height of 1,515mm, and a wheelbase reaching 2,500mm. This size design brings quite a few advantages. The reasonable length and width allow the vehicle to move freely on urban roads and make parking a breeze. The appropriate height not only ensures sufficient headroom for passengers inside the car but also optimizes the aerodynamic performance and reduces wind resistance. The 2,500mm wheelbase makes the rear seating area more spacious, enhancing the legroom comfort for passengers. Moreover, the rear seats can be folded down, enabling a flexible adjustment of the interior space layout according to the needs of carrying passengers or cargo. This greatly improves the space utilization and practicality, allowing it to easily handle both daily commuting and transporting goods.