Q

How to calculate tire pressure?

Calculating tire pressure requires following scientific methods to ensure accuracy. First, measurements should be taken when the tires are cold (e.g., after the vehicle has been parked for 3 hours or driven no more than 1.6 kilometers) to avoid temperature affecting the readings. The standard tire pressure values are usually marked on the inside of the door frame, fuel tank cap, or in the user manual, with units possibly being Bar, kPa, or psi (e.g., 2.3-2.5 Bar is recommended for small cars). It is recommended to use a tire pressure gauge for testing, either mechanical pointer-type or electronic. When operating, the air nozzle should be tightly attached to the valve core and the stable reading should be taken. If the vehicle is equipped with a Tire Pressure Monitoring System (TPMS), regular manual calibration is still required to eliminate system errors. Abnormal tire pressure poses safety hazards: excessively high pressure leads to reduced grip, extended braking distance, and central tire wear; excessively low pressure increases fuel consumption, shoulder tire wear, and the risk of tire blowouts. It is recommended to check the tire pressure at least once a month, and an additional check is needed before long-distance driving. Note that tire pressure may need fine-tuning for different tire brands or under load conditions, but the adjustment range should strictly follow the manufacturer's standards.
Special Disclaimer: This content is published by users and does not represent the views or position of PCauto.
  • Popular Cars

  • Model Year

  • Car Compare

  • Car Photo

Latest Q&A

Q
How much does it cost to replace the air filter in a car?
The cost of replacing a car's air filter typically ranges from 50 to 150 Malaysian Ringgit, with the specific price depending on the vehicle model, filter material, and brand differences. Original equipment manufacturer (OEM) parts are more expensive but offer more precise compatibility, while third-party brand filters have better cost-effectiveness but require attention to certification standards. The recommended replacement interval for air filters is 10,000 to 20,000 kilometers or once a year; if you frequently drive in dusty environments (such as construction sites or rural roads), the interval should be shortened to 5,000 kilometers or every six months. Dry filters are the mainstream choice, featuring a resin-treated filter paper structure that effectively traps particles and is easy to maintain. It should be noted that prolonged use of a dirty filter can increase engine intake resistance by more than 15%, leading to a 5%-10% rise in fuel consumption and accelerated piston ring wear. It is recommended to inspect the filter's condition during each maintenance service; if significant dust accumulation in the pleats or deformation is observed, immediate replacement is necessary. Some vehicle models have specially designed filter locations, and DIY replacement may require disassembling the intake piping. In such cases, professional technician service is recommended to ensure proper sealing. Regular replacement not only maintains the engine's optimal air-fuel ratio but also prevents cylinder wall scoring caused by contaminant ingress, ultimately saving higher maintenance costs in the long run.
Q
What are the signs of a bad filter?
Common signs of filter failure include loss of power, unstable idling, and difficulty starting, with specific manifestations varying by filter type. For gasoline filters, clogging causes insufficient fuel supply, manifesting as sudden stalling while driving, weak acceleration, or a sudden drop in maximum speed to 70-80 km/h. Long-term non-replacement may corrode the fuel system, so it is recommended to inspect and replace them every 10,000 to 15,000 kilometers. When the air filter is dirty, the engine may experience abnormal vibration, delayed acceleration, or black exhaust; in dusty environments, the maintenance interval needs to be shortened to 5,000 kilometers. Oil filter failure is accompanied by blackened oil, a sour smell, or the engine light turning on, requiring simultaneous oil replacement. Original equipment manufacturer (OEM) parts must be used when replacing all filters; inferior filter elements may release debris and exacerbate mechanical wear. Regular maintenance can prevent increased carbon deposits and damage to the fuel injection system. It is recommended to adjust the maintenance frequency based on driving conditions, such as replacing the air filter in advance in dusty areas.
Q
Can I replace the air filter myself?
Replacing the air filter is a relatively simple car maintenance task that car owners can perform themselves, but attention should be paid to operating specifications and replacement intervals. The primary function of the air filter is to filter the air entering the engine and prevent dust and impurities from damaging the cylinders. The recommended replacement interval is typically every 10,000 to 20,000 kilometers or once a year. The specific interval should be determined by consulting the vehicle manual and considering actual usage conditions. For instance, in dusty rural areas or during severe haze conditions, the replacement frequency should be increased to every 5,000 kilometers or every three months. Dry-type filters are the most common; if slightly dirty, they can be cleaned with compressed air, but if heavily soiled, the filter element should be replaced. When performing the replacement yourself, ensure the new filter element matches the original factory specifications. When removing the housing, be mindful of the clip positions to avoid damage. During installation, verify that the sealing gasket is intact to prevent unfiltered air from entering the engine. Regular air filter maintenance can significantly enhance engine efficiency, prevent power loss or increased fuel consumption due to restricted airflow, and prolong the engine's lifespan. If unfamiliar with the procedure, consult the vehicle-specific service manual or watch official instructional videos to ensure proper execution.
Q
Can I clean my car air filter instead of replacing?
Air filters can indeed be cleaned rather than directly replaced, but this should be determined based on usage conditions and the filter element's state. Under normal road conditions, cleaning every 5,000 kilometers is recommended, while in areas with heavy sand or dust, the interval should be reduced to 3,000 kilometers. Replacement is mandatory every 20,000 kilometers or if significant discoloration/damage to the filter media is observed. During cleaning, ensure the engine is shut off and cooled for 15-20 minutes. Use compressed air to blow out dust from the interior outward, or gently tap the filter while brushing - never use water or gasoline as these may damage the paper element. Abnormal fuel consumption increases may indicate a clogged filter requiring immediate inspection. Proper maintenance effectively protects the engine, reduces wear, and extends service life. Particular attention must be paid to the seal integrity during reinstallation to prevent unfiltered air ingress. Regular air filter maintenance remains crucial for maintaining vehicle performance and operating economy.
Q
How do I know if my air filter needs replacing?
Determining whether an air filter needs replacement requires considering multiple factors such as driving environment, vehicle condition, and the filter's appearance. For regular urban driving, it is recommended to replace the filter every 15,000 to 20,000 kilometers or 12 months. If the vehicle is operated in dusty, hazy, or humid areas for extended periods, the replacement interval should be reduced to 5,000-8,000 kilometers or 3-6 months. For off-road or unpaved road driving, mandatory inspection is required every 3,000 kilometers. The filter must be replaced immediately if the filter paper appears darkened, exhibits poor light transmission, shows cracks in the sealing strip, or accumulates a dust layer exceeding 1 millimeter on the surface. Noticeable power loss (such as sluggish acceleration) or abnormal fuel consumption increase exceeding 10% also indicates the need for replacement. If the filter becomes damp and deformed after water exposure, immediate attention is required. During routine maintenance, gently tap the filter to observe dust dislodgement, or examine the filter paper's light transmission against a light source. Original equipment manufacturer (OEM) filters typically cost between 40-160 ringgit, and priority should be given to products meeting OE standards to ensure filtration efficiency. Regular inspections are more crucial than rigid adherence to replacement intervals, as they prevent engine wear while optimizing fuel efficiency.
View More