Is Perodua Alza good?

Yes, front-wheel drive (FWD) cars, like all modern passenger vehicles, come with four brakes—one for each wheel. This setup is crucial for safety and meets international standards. Typically, FWD systems use dual-piston calipers up front and single-piston ones in the rear. Why? Because the front wheels handle most of the braking force—around 70%—especially since weight shifts forward when you slow down. To dig a bit deeper: whether it's FWD, RWD, or AWD, brake systems work on the same basic principles. But high-performance models often step things up with larger rotors or multi-piston calipers to boost cooling and stopping power. For everyday driving, keeping an eye on brake pad thickness and brake fluid condition is a must. If you notice longer stopping distances or weird noises, get it checked out ASAP—safety first. And let's not forget, many premium cars now come with Electronic Brakeforce Distribution (EBD) and Brake Assist (BAS), which smartly tweak braking performance for better results.

There are four main types of braking systems commonly found in cars: disc brakes, drum brakes, electronic parking brakes, and regenerative braking systems. Disc brakes slow the vehicle by having brake calipers clamp down on brake discs. They offer excellent heat dissipation and are typically used on front wheels or in high-performance cars. Drum brakes, on the other hand, use brake shoes that expand outward to rub against the brake drum. They're cheaper to produce and are often found on rear wheels or in economy cars. Electronic parking brakes use a button to control a motor for parking, making them easy to operate and space-saving, gradually replacing traditional manual handbrakes. Regenerative braking is a key technology in hybrid and electric vehicles, as it can convert the kinetic energy generated during braking into electricity for storage. Most vehicles today use a mix of these braking types; for example, the front-disc-rear-drum setup balances performance and cost. In daily driving, it's important to check the thickness of your brake pads. If you hear a metallic scraping noise or notice reduced braking power, you should replace the brake pads or brake fluid promptly. Brake discs tend to rust easily in the rainy season, but gently pressing the brakes a few times during initial driving can remove the rust and ensure driving safety.

When your car's brakes fail, the first thing to do is stay calm. Quickly flip on your hazard lights to warn other vehicles, then try pumping the brake pedal rapidly—this might restore some braking power. If you're driving a manual, downshift gradually to use engine braking; for automatics, switch to manual mode or a lower gear. Keep a firm grip on the steering wheel to maintain control, avoiding sharp turns that could cause a skid. If needed, use the handbrake to help slow down, but don't yank it all the way to prevent fishtailing. Once speed drops, look for a safe spot to pull over. Regular maintenance is key: check brake fluid levels and condition routinely, replace brake pads when they wear below 3mm, and get immediate repairs if the pedal feels soft or has extra travel—air in the lines or fluid leaks can disable the system. On long downhill mountain roads, use lower gears to control speed and reduce brake fade from overheating. After driving in the rain, tap the brakes lightly to clear water film and boost stopping power. Most importantly, develop good predictive driving habits to cut down on sudden braking needs.

A car's rear brake system, commonly referred to as the "rear wheel braking system," mainly includes two types: drum brakes and disc brakes. Drum brakes have a simple structure and lower cost, commonly found on the rear wheels of economy models. They slow the vehicle by brake shoes expanding outward to friction against the brake drum. Disc brakes, on the other hand, use brake calipers to clamp the brake disc, offering better heat dissipation and braking efficiency, and are mostly used on the rear wheels of mid-to-high-end models or high-performance vehicles. Modern vehicles typically use different front and rear brake combinations based on front and rear axle load distribution and braking force requirements. For example, disc brakes on the front wheels and drum brakes on the rear, or all-disc brakes on all four wheels. Some high-performance cars are also equipped with ventilated discs or slotted/drilled discs to enhance heat dissipation. In addition, the Electronic Brakeforce Distribution (EBD) system dynamically adjusts the front-to-rear braking force ratio to ensure vehicle stability during hard braking. Systems like ABS (Anti-lock Braking System) and ESC (Electronic Stability Control) also work in conjunction with the rear brakes to improve safety on slippery roads. In daily driving, rear brakes usually wear less than front brakes, but regularly checking brake pad thickness and brake fluid condition remains a necessary maintenance item. This is especially important when driving in mountainous areas or in scenarios with frequent braking, where paying attention to the rear brake performance is crucial.

Cars come with four braking systems mainly to boost stopping power and safety. Modern vehicles typically have independent brake setups at each wheel, whether disc or drum brakes. This design ensures braking force is evenly distributed, reducing the risk of losing control from one-sided braking—especially crucial when driving at high speeds or making emergency stops, where four-wheel braking shortens stopping distances and keeps the vehicle stable. Plus, four-wheel brake systems are a must for meeting modern safety standards; features like Anti-lock Braking Systems (ABS) and Electronic Brakeforce Distribution (EBD) rely on independent control of each wheel to work their best. Some high-performance cars even upgrade to multi-piston calipers or ventilated disc brakes, which enhance heat dissipation and resistance to fade, perfect for spirited driving or long downhill stretches. For everyday driving, regularly checking brake pad thickness and brake fluid condition is key to keeping your braking system in top shape.