Q

proton x70 tyre pressure how much

The normal tire pressure for the Proton X70 is typically between 2.3 and 2.5 bar. However, the exact tire pressure may vary depending on factors such as vehicle load, driving conditions, and climate. It is recommended that you consult the vehicle's user manual for more precise information.
Special Disclaimer: This content is published by users and does not represent the views or position of PCauto.

Related Q&A

Q
how to change time on proton x70
To change the time on the Proton X70, the process is typically as follows: First, locate the settings option on the vehicle's control panel, then navigate to the time setting function. Usually, you can adjust the hours and minutes using buttons or the touchscreen. However, please note that the specific steps may vary slightly depending on the configuration of the Proton X70.
Q
how to reset proton x70 tyre pressure
To reset the tire pressure on the Proton X70, you can typically follow these steps: First, ensure the vehicle is stationary and the power is on. Then, locate the tire pressure-related settings option on the vehicle's control panel or information display. Once you access this option, there may be a "Reset" or "Re-calibrate" button; pressing this button will complete the tire pressure reset. However, please note that the specific steps may vary slightly depending on the model year and configuration of the Proton X70.
Q
proton x70 how many cylinder
The Proton X70 is typically equipped with a four-cylinder engine.
Q
what engine does proton x70 use
The Proton X70's 1.5L engine is a 1.5L TGDI engine. It is paired with a 7-speed DCT transmission, delivering a maximum horsepower of 174 hp and a peak torque of 255 Nm. Compared to previous versions, the fuel efficiency has improved, achieving up to 7.3L/100KM.
Q
how to install youtube in proton x70
Installing YouTube on the Proton X70 may involve violating relevant laws, regulations, and the vehicle manufacturer's guidelines. Generally, the original multimedia system of the vehicle does not support the installation of unauthorized applications. It is recommended that you comply with local laws and vehicle usage rules and refrain from attempting such unauthorized operations to avoid affecting the vehicle's warranty and normal usage.
Q
how to change proton x70 key battery
The steps to replace the battery in the Proton X70 car key are typically as follows: First, locate the small switch or button on the car key and press it to release the mechanical key. Then, use a small screwdriver or a similar tool to gently pry open the key's casing. Be careful not to use excessive force to avoid damaging the key. Remove the old battery, check its model, and ensure the new battery matches it. Finally, insert the new battery correctly into the battery slot and close the key casing.
Q
how to use proton x70 cruise control
The method to use cruise control in the Proton X70 is as follows: First, ensure the vehicle is traveling at a certain speed, typically above 40 km/h. Then, locate the cruise control button on the steering wheel, usually marked with "CRUISE." Press this button to activate the cruise control function, and the vehicle will maintain the current speed. To adjust the speed, use the "+" and "-" buttons to increase or decrease it. If you need to temporarily cancel cruise control, gently press the brake pedal. Press the "CRUISE" button again to resume the previously set speed.
Q
proton x70 which variant to buy
The Proton X70 comes in multiple configuration versions, and the choice of which one to select depends on your personal needs. If you prioritize comfort and high-end features, you might consider the top-tier version, which typically includes more advanced driver-assistance systems, luxurious interior trim, and premium audio systems. If you have a limited budget, the mid-range version is also a good option, as it meets basic daily needs while being relatively more affordable. Regardless of the version you choose, the Proton X70 offers excellent value for money and reliability in the Malaysian market.
Q
how to register proton link x70
To register a Proton X70, the general steps are as follows: First, prepare the necessary documents, including the vehicle purchase invoice, vehicle certification, personal identification, and others. Then, visit the local road traffic department to submit your application and pay the relevant fees. Next, the vehicle will undergo an inspection to ensure it meets safety and environmental standards. After the inspection is completed, the road traffic department will issue the vehicle registration certificate and license plate. Please note that the specific registration process and requirements may vary depending on the region.
Q
how to jump start proton x70
To jump-start a Proton X70, first ensure that the engines of both the rescue vehicle and the Proton X70 are turned off. Then, connect one end of the red jumper cable to the positive terminal (marked with a "+" sign) of the rescue vehicle's battery, and the other end to the positive terminal of the Proton X70's battery. Next, connect one end of the black jumper cable to the negative terminal (marked with a "-" sign) of the rescue vehicle's battery, and the other end to a metal part of the Proton X70, ensuring that the connection point is away from the battery and not covered by paint. After making the connections, start the rescue vehicle and let it run for a few minutes. Then, attempt to start the Proton X70. Once the Proton X70 starts successfully, carefully remove the jumper cables in the reverse order.

Pros

The size of the car series is large, the interior space is spacious, comparable to high-end cars
The interior is comfortable and convenient, the workmanship is good, the assembly and decoration are impeccable
The engine responds positively and powerfully

Cons

The overall design is not eye-catching and unique, the front-end style is plain, the grille is simple
The support under the thighs of the rear seats is insufficient, and the rear bench is short
The 6-speed automatic transmission shifts slowly, resulting in a less exciting driving experience compared to other high-end SUVs

Latest Q&A

Q
How to Calculate the Load Capacity of Jaecoo J7? Get Idea Here!
To calculate the load capacity of the Jaecoo J7, the primary method is to subtract the vehicle's curb weight (kerb mass) from its gross vehicle weight rating (GVWR) to determine the maximum permissible load. Typically, the Jaecoo J7 has a GVWR ranging from 2,200 to 2,500 kg, while its curb weight falls between 1,600 and 1,800 kg, resulting in a maximum payload capacity of approximately 400 to 700 kg. The exact figures should be verified against the official manual. When calculating the load, ensure it includes the weight of passengers, luggage, and any additional accessories. Proper load distribution is advised to avoid overloading, which could compromise handling and braking performance. For frequent cargo transportation, compare the axle load limits and conduct dynamic balance checks to ensure driving safety.
Q
What Is Jaecoo J7? Here's a Full Introduction for You
The Jaecoo J7 is a C-segment vehicle, available in the 2024 fuel-powered version (including 2WD and AWD) and the 2025 PHEV version. The fuel-powered version is equipped with a 1.6L turbocharged engine, with a maximum power of 145kW and a maximum torque of 290N·m. It is paired with a 7-speed dual-clutch transmission. The official 0 - 100km/h acceleration times are 9.9 seconds (2WD) and 9.2 seconds (AWD), and the combined fuel consumption figures are 7L/100km (2WD) and 7.7L/100km (AWD). The prices are RM 138,800 (2WD) and RM 148,800 (AWD). The PHEV version combines a 1.5T turbocharged engine with an electric motor. The system's combined power is 255kW, and the combined torque is 525N·m. It has an all-electric range of 106 kilometers and is priced at RM 158,800. The vehicle is 4500mm long, 1865mm wide, and 1670mm (PHEV) or 1680mm (fuel-powered version) high, with a wheelbase of 2672mm. It features a rugged exterior. Inside, there's a 10.25-inch instrument cluster and a 13.2-inch (fuel-powered 2WD) or 14.8-inch (fuel-powered AWD and PHEV) center console display. It's also equipped with a Sony audio system and other features. The safety configuration is comprehensive, including ABS, vehicle stability control, and so on.
Q
What Is the Tire Size of Jaecoo J7? Check Standard Here
The tire specifications vary among different versions of the Jaecoo J7. Both the 2024 Jaecoo J7 2WD and 2024 Jaecoo J7 AWD are equipped with R19 tires for both the front and rear. This specification strikes a good balance between stability and comfort during daily driving and is suitable for various road conditions. The 2025 Jaecoo J7 PHEV 2WD is equipped with 235/50 R19 tires on both the front and rear. These tires are wider, which increases the contact area with the ground. As a result, they offer relatively stronger grip and perform better in terms of acceleration, braking, and handling, providing the vehicle with better driving stability. Tire specifications have a significant impact on vehicle driving. The appropriate specification not only affects driving safety but also influences the vehicle's handling, comfort, and fuel economy.
Q
What Are the Problems of Jaecoo J7? Learn Before You Buy
Before considering purchasing the Jaecoo J7, there are several issues worth paying attention to. Some drivers have reported that the torque distribution of this vehicle across the entire speed range seems uneven, and the engine runs a bit roughly at low speeds. The gearbox hesitates when starting from a standstill or with moderate throttle input. Additionally, the trunk capacity of the J7 is 500L, which is relatively small and not very user - friendly for those with a high demand for luggage loading. However, it also has many advantages. It is equipped with abundant safety features, including standard body stability control, multiple airbags, and lane - change assist. The interior configuration is also quite comfortable, with a multi - function steering wheel, HUD head - up digital display, and zone - controlled air conditioning. Moreover, it offers a variety of drive modes and power types, which can meet the needs of different consumers. Consumers can make a decision based on their own requirements.
Q
What's the Boot Capacity of Jaecoo J7?
The boot capacity of Jaecoo J7 is 500 liters, and the space can be expanded to a larger one when the seats are folded down, offering great convenience for trips. If you need to load daily shopping items, travel gear, or sports equipment, the regular 500 - liter capacity can basically meet your needs. When it comes to moving large items like bicycles or furniture, which are often irregular in shape, you can fold down the rear seats in proportion to create a relatively flat space. This way, you can easily fit these items in, greatly enhancing the vehicle's practicality and cargo - carrying capacity. Whether it's a family trip or personal daily use, the Jaecoo J7 can well handle different loading requirements in various scenarios.
View More