Q
Do Mitsubishi Lancers 2016 have CVT transmission?
The 2016 Mitsubishi Lancer was equipped with a CVT automatic transmission in the Malaysian market. That was Mitsubishi's main transmission technology back then, aimed at improving fuel economy and enhancing driving smoothness – perfect for all the frequent stop - and - go situations you get in city traffic.
How does a CVT work? It uses a steel belt and pulleys to give you that seamless, "stepless" acceleration, which lets the engine work more efficiently compared to a traditional automatic transmission with a fixed number of gears.
Now, it's worth mentioning that Lancer specs could vary a bit from one market to another, but in Malaysia, the 2016 model was mainly offered with the CVT. I think some trim levels might have still had a manual gearbox as an option, for drivers who prefer manual gear shifting.
For Malaysian drivers, the CVT in the Lancer performs reliably in the hot weather and those heavy traffic jams. Plus, maintenance costs are relatively low. But here's the thing, you must remember to change the CVT fluid regularly with the right stuff. That's key to keeping it running strong for the long haul.
If you're looking at a used Lancer, it is advisable to get a professional to check the transmission properly. And definitely ask to see the service records from the original owner. It'll give you peace of mind knowing the gearbox has been looked after.
Special Disclaimer: This content is published by users and does not represent the views or position of PCauto.
Related Q&A
Q
Does the 2016 Mitsubishi Lancer have a rearview camera?
The 2016 Mitsubishi Lancer did come with a rearview camera on some of its higher-spec trims in the Malaysian market, especially the GT and GT Premium variants. Back then, this was a really practical safety feature that gave drivers a clearer view of what was behind them when reversing, which was super helpful. It's worth keeping in mind that specs can vary by region, though. If you're a owner, your best bet is to check the vehicle settings menu, flip through the owner's manual, or just give a Mitsubishi authorized dealer in Malaysia a call to get the exact lowdown on your car's features. These days, rearview cameras are pretty much standard on most new cars, and they often work hand-in-hand with parking sensors to cut down on blind spots—something that's especially useful for those tight parking spots you often find in Malaysia. If your Lancer didn't come with one from the factory, you might be thinking about adding an aftermarket one. Just make sure you go through a reputable auto parts shop, though. It's crucial that any modifications meet JPJ regulations, and you'll want a good-quality unit that's compatible with your car's system to avoid voiding any warranties.
Q
What is the difference between the 2016 Lancer ES and GT trim?
The key differences between the 2016 Mitsubishi Lancer ES and GT variants lie in their equipment and performance. As the entry-level trim, the ES comes with a 1.6L MIVEC engine (117 hp), paired with either a 5-speed manual or CVT gearbox. It rolls on standard 16-inch steel wheels and features manual air conditioning plus a basic audio system, focusing squarely on affordability and practicality. Step up to the GT, and you're looking at a more potent 2.0L MIVEC powerplant (148 hp), mated to a CVT with paddle shifters. Externally, it gets sportier styling with 18-inch alloy wheels and body kits, while the cabin ups the ante with a leather-wrapped steering wheel, keyless entry, automatic climate control, and a premium Rockford Fosgate sound system. Safety-wise, the GT also adds side airbags and vehicle dynamic control.
For Malaysian buyers, the GT trim is better suited for those seeking driving enjoyment and enhanced features – its retuned suspension, in particular, handles our diverse local road conditions more capably. It's worth noting that the Lancer holds strong resale value in the used car market here, with the GT variant being especially popular thanks to its higher spec. If you're eyeing a pre-owned model, make sure to check the CVT transmission's service history thoroughly – that's a critical maintenance point for this model in our tropical climate.
Q
Is the 2016 Mitsubishi Lancer good in the snow?
How the 2016 Mitsubishi Lancer handles in snow really comes down to how it's kitted out. If you've got the all-wheel drive (AWD) version paired with winter tires, you'll definitely notice a big step up in stability when things get snowy. The AWD system does a solid job of shuffling power between all four wheels, and winter tires—with their deeper treads and that special rubber compound—really dig in for better grip. But if you're rolling on a front-wheel drive model with all-season tires? You'll want to take it easy. Slow down, and avoid slamming on the brakes.
Now, for our readers in Malaysia, I get it—snow isn't exactly a regular thing here. But understanding how a car behaves in different conditions is still useful. Think about those rainy season downpours when roads get slick; the same logic applies. Swapping in the right tires and keeping good driving habits go a long way. Oh, and don't sleep on regular brake checks and keeping your tire pressure dialed in—those small things make a big difference for safety.
As an affordable daily driver, the Lancer's mechanical reliability holds up pretty well across different climates. But let's be real—extreme conditions still call for the right setup and some smart driving moves.
Q
What is the safety rating of the 2016 Mitsubishi Lancer?
The 2016 Mitsubishi Lancer scored a 4-star safety rating from ASEAN NCAP, based largely on its stable body structure, dual front airbags, and standard ABS brakes. While that covers the basics, it falls a bit short compared to some contemporary rivals that bagged 5-star ratings with features like six airbags or active safety tech such as automatic emergency braking.
In the Malaysian market, the Lancer's passive safety still holds up for daily driving. Its RISE anti-collision body design does a decent job of dispersing impact forces, which is good. But here's the thing: side airbags and Electronic Stability Control (ESC) aren't standard. If you're after extra protection, looking into third-party safety accessories might be a smart move.
It's worth noting that ASEAN NCAP's testing focuses more on Southeast Asian road conditions, with tests like the 40% offset crash and pedestrian protection. It's not quite as comprehensive as Euro NCAP, so I'd definitely recommend checking out the detailed report on their official website before buying and weighing it against your own driving habits.
If your budget stretches further, the Toyota Corolla or Honda Civic from the same era probably offer more in terms of active safety kit. But the Lancer still has its appeal, especially with its lower used car prices – it's a solid value pick for Malaysian buyers who prioritize practicality.
Q
How to connect bluetooth to 2016 Mitsubishi Lancer?
So, you want to pair your phone with the Bluetooth in a 2016 Mitsubishi Lancer? No sweat. First, fire up the car and make sure that center display is on. Once you're on the main menu, look for either "Settings" or just straight-up "Bluetooth" – it's usually pretty easy to spot. Dive into that, then flip on the Bluetooth function and make sure the car is set to be discoverable by other devices.
Now grab your phone, head into its Bluetooth settings, and scan for nearby devices. The Lancer's system should pop up, probably labeled something like "Mitsubishi" or "Lancer" – pretty straightforward. Tap to connect, and it'll ask for a passcode. The default's usually something simple like "0000" or "1234" – check your owner's manual if those don't work, but they're the usual suspects. Once it pairs up, you're golden – stream your tunes, take calls hands-free, all that good stuff.
If you hit a snag – like it won't connect or keeps dropping – try giving both the car's system and your phone's Bluetooth a quick restart. And hey, do all this while the car's parked, yeah? Safety first when messing with settings.
Bluetooth is pretty much standard in cars these days, right? Beyond just music, a lot of rides (including some Lancers, depending on trim) let you make calls directly through the system or even use voice commands. Pro tip: keep your phone's OS and the car's infotainment software updated. It helps with compatibility and keeps everything running smooth. And most importantly, once you're rolling, keep your eyes on the road – don't fiddle with the Bluetooth controls too much. Distracted driving's no joke.
Q
What size engine is in the 2016 Lancer?
The 2016 Mitsubishi Lancer hit the Malaysian market with two engine choices: 1.6L and 1.8L naturally aspirated four-cylinders. The 1.6L (code-named 4A92) cranks out 113 hp and 149 Nm of torque, while the 1.8L (4B10) steps things up to 139 hp and 172 Nm. Both mills pair with either a CVT automatic or 5-speed manual, depending on trim, focusing on fuel efficiency and smooth driving dynamics. For Malaysian buyers, these engine options make the Lancer a solid pick for daily commutes and family use. The 1.6L shines in city traffic with its better fuel sipping, while the 1.8L delivers more punch for highway jaunts. It’s worth noting that while naturally aspirated engines don’t pack the same punch as turbos, they’re cheaper to maintain and time-tested reliable—perfect for folks who value long-term dependability. On top of that, the Lancer’s suspension is tuned for comfort, handling Malaysia’s varied road conditions like a champ, whether you’re navigating city streets or logging highway miles.
Q
How to connect phone to Mitsubishi 2016?
Connecting your phone to a 2016 Mitsubishi is straightforward, but first, make sure your specific model supports either Bluetooth or USB connectivity. Most 2016 Mitsubishi models like the ASX, Triton, and Outlander come equipped with both options. For Bluetooth pairing, start by turning on your phone's Bluetooth, then head into your car's settings menu and select "Bluetooth Devices." Search for available devices, pick your phone, and follow the prompts to complete pairing—some models might ask for a PIN, usually "0000" or "1234."
If you prefer USB, just plug your phone into the car's USB port using the original charging cable. The system should automatically detect it, letting you use features like screen mirroring or charging. A few models even support Apple CarPlay or Android Auto, but you'll need to enable those settings on your phone first.
Pro tip: Keep your car's infotainment system updated to avoid compatibility headaches. If you run into connection issues, try restarting your phone or the car's system—it usually fixes minor glitches. For our friends in Malaysia, remember that the hot weather can cause phones to overheat, which might mess with connectivity. Keep your phone in a well-ventilated spot to prevent that.
Mitsubishi's infotainment systems are designed with everyday usability in mind—simple interfaces that don't overcomplicate things. If you need model-specific details, check your owner's manual or reach out to an authorized Mitsubishi service center in Malaysia for help.
Q
Is 2016 Lancer AWD?
The 2016 Mitsubishi Lancer didn't come with an all-wheel drive (AWD) option in the Malaysian market. It was strictly front-wheel drive (FWD), which is pretty standard for most compact sedans in its class. As a practical, budget-friendly family car, the Lancer's FWD setup struck a decent balance between fuel efficiency and everyday drivability – perfect for city commutes and those longer highway trips.
If AWD is a must-have for you, Mitsubishi's got other options in their lineup, like the Outlander or ASX. Those SUVs do offer AWD here in Malaysia, which comes in handy for slippery roads or light off-road adventures. Just keep in mind, while AWD does boost stability in tricky conditions, it typically adds a bit to your fuel bill and maintenance costs too. So, it really boils down to weighing up what you'll actually use the car for.
Malaysia's tropical climate and rainy weather might pique some drivers' interest in AWD, but honestly, a regular FWD Lancer with good tires and electronic stability control should handle most daily driving scenarios just fine.
Q
What kind of battery does a 2016 Lancer take?
The 2016 Mitsubishi Lancer in the Malaysian market typically comes fitted with a 12-volt lead-acid battery. Specifically, you're looking at either the 46B24L (for the 1.6L and 1.8L variants) or the 55D23L (for the 2.0L model). Both are maintenance-free (MF) batteries, boasting decent longevity and reliable performance – perfect for Malaysia's hot and rainy weather. When it's time for a replacement, stick with reputable brands like Yuasa, Bosch, or Panasonic. These names have solid reputations locally and usually offer good after-sales support. Also, make it a habit to check your battery's condition regularly – things like voltage and electrolyte levels – and ensure your charging system is working properly. That'll go a long way in extending its life. If your Lancer has a start-stop system, you'll need a dedicated AGM or EFB battery to keep everything compatible. A quick heads-up though: battery specs can sometimes vary slightly between different years or trim levels of the Lancer, so it's always smart to double-check your owner's manual or chat with a professional mechanic to confirm the exact battery you need before making a purchase.
Q
How big is the gas tank on a 2016 Lancer?
The 2016 Mitsubishi Lancer comes with a 59-liter fuel tank, which sits comfortably above the mid-range for its class. That's a solid size that translates to decent driving range – perfect for Malaysian drivers who want fewer stops at the pump, whether it's for daily commutes around town or longer highway trips. As a tried-and-true family sedan, the Lancer already boasts pretty good fuel economy, so pairing that with a 59L tank is a smart combo that helps keep running costs in check. Let's face it, petrol prices in Malaysia aren't exactly cheap, so picking a car with a well-sized tank and good fuel efficiency is a big deal – and the 2016 Lancer balances both nicely. Oh, and don't forget: keeping up with regular maintenance checks on your tank and fuel system is key to making your car last. Stick to the manufacturer's recommended service schedule, and you'll keep that fuel system clean and working at its best.
Popular Cars
Model Year
Car Compare
Car Photo
Latest Q&A
Q
How much time does it take to change brake pads?
The replacement of brake pads usually takes 1 to 2 hours, with the specific duration depending on the vehicle model structure and the technician's proficiency. However, the actual replacement interval should be determined based on comprehensive assessment of the vehicle's usage conditions. It is recommended to inspect and replace front brake pads every 30,000 to 50,000 kilometers, while rear brake pads should be evaluated between 60,000 to 100,000 kilometers. More importantly, monitor the wear thickness: new pads measure 1.5 cm in thickness. Replacement should be considered when wear reaches 5 mm (approximately one-third of the original thickness), and becomes mandatory when below 3 mm.
Driving habits significantly impact their service life. Frequent hard braking or prolonged heavy loads may reduce the replacement interval to 20,000 kilometers, whereas conservative driving can extend it to 80,000 kilometers. Regarding materials, semi-metallic brake pads offer optimal durability, while ceramic pads provide superior braking performance but wear faster.
Particular attention should be paid to metal-on-metal grinding noises or noticeable reduction in braking effectiveness - immediate servicing is required even if the recommended mileage hasn't been reached. Professional inspections are advised every 5,000 kilometers or six months, with shorter intervals for mountainous terrain driving or automatic transmission vehicles. During replacement, opt for genuine parts and concurrently examine the brake discs and fluid condition to ensure overall braking system reliability.
Q
How quickly do brake pads wear?
The wear rate of brake pads typically ranges from 30,000 to 100,000 kilometers, depending on factors such as driving habits, road conditions, and the material of the brake pads. Front brake pads, which bear a heavier load, usually need to be replaced every 30,000 to 50,000 kilometers, while rear brake pads may last longer, up to 60,000 to 100,000 kilometers. Frequent sudden braking or driving in congested urban areas can significantly accelerate wear; for example, urban driving may reduce the brake pad lifespan to 30,000 kilometers, whereas highway driving can extend it to 50,000 to 60,000 kilometers. The material of the brake pads also affects their lifespan: metallic brake pads are wear-resistant but have a shorter lifespan (30,000 to 50,000 kilometers), while ceramic brake pads are more durable (60,000 to 80,000 kilometers). It is recommended to check the thickness of the brake pads regularly. When the remaining thickness is less than 5 millimeters or a sharp friction noise is heard, they should be replaced immediately. Additionally, selecting a brake pad material suitable for the driving scenario and maintaining smooth driving habits can effectively extend their service life.
Q
How to check car brake pads without removing wheel?
To check the brake pad thickness without wheel removal, multiple methods can be used for comprehensive assessment. First, visually inspect the brake pads through the wheel hub gaps at approximately a 15-degree angle. New brake pads are about 1.5 cm thick and require immediate replacement when worn down to 0.3 cm or level with the raised wear indicators on both sides. Some vehicle models feature wheel hub designs permitting direct visual inspection; if the remaining pad thickness is only 1/3 of the original (approximately 0.5 cm), inspection frequency should be increased.
Auditory cues are equally crucial. A metallic scraping sound during light brake application indicates the pads have reached their wear limit, necessitating simultaneous inspection of the brake discs. Regarding driving feedback, symptoms like increased brake pedal travel, reduced braking efficiency, or abnormal vibrations typically signal excessive pad wear. Most modern vehicles incorporate wear warning systems, and illumination of the brake warning light on the dashboard warrants prompt servicing.
Regular inspections every 20,000-30,000 km or six months are recommended, with more frequent checks for vehicles operating in mountainous terrain or under heavy braking conditions. While professional workshops employ vernier calipers or specialized thickness gauges for precise measurements, the aforementioned methods provide effective routine monitoring to ensure driving safety.
Q
What is the average lifespan of brakes?
The average lifespan of brake pads is affected by multiple factors. Front brake pads typically last between 30,000 and 50,000 kilometers, while rear brake pads last around 60,000 to 100,000 kilometers. However, the specific value needs to be comprehensively determined based on driving habits, road conditions, and vehicle type. Frequent sudden braking, driving in mountainous areas, or on congested urban roads will accelerate wear, while smooth driving and highway conditions can extend the service life. The material of the brake pads is also crucial: metal pads last about 30,000 to 50,000 kilometers, semi-metallic pads 50,000 to 70,000 kilometers, and ceramic pads can reach 60,000 to 80,000 kilometers. It is recommended to check the thickness regularly. A brand-new brake pad is approximately 10 to 12 millimeters thick, and it must be replaced when worn down to 3 millimeters. If there is a metal friction sound or reduced braking power, immediate attention is required. Some vehicle models are equipped with wear sensors, and the instrument panel will prompt for replacement. It should be noted that judging solely by time is inaccurate; even if the thickness is sufficient for a vehicle parked for a long time, it should be inspected if it has been parked for more than 5 years. During daily maintenance, it is advisable to have a technician measure the thickness to ensure driving safety.
Q
What do bad brake pads sound like?
When brake pads have issues, they typically emit several distinct sounds. The most common is a sharp, high-pitched metallic scraping noise, which often indicates the brake pads have reached their wear limit (thickness below 3mm). The built-in metal wear indicator directly contacts the brake rotor, producing this high-frequency sound, necessitating immediate replacement. Intermittent "squeaking" noises may result from insufficient lubrication between the brake pads and caliper or a deformed retraction spring, whereas continuous "grinding" sounds suggest grooves on the brake rotor surface or embedded foreign objects like sand or gravel. New vehicles or recently replaced brake pads may produce brief "hissing" sounds during the initial break-in period, which is normal. However, if the sound persists beyond 500 kilometers, the installation should be inspected for proper alignment. Note that temporary rust-induced noise after rain (typically fading within 2-3 brake applications) is normal, but if accompanied by brake pedal pulsation, it may indicate rotor warping. It's recommended to inspect brake pad thickness every 30,000 kilometers. Original equipment manufacturer (OEM) brake pad replacement costs approximately 200-500 Malaysian Ringgit per axle set, while performance variants may exceed 800 Ringgit. When selecting replacements, ensure compatibility with the vehicle's original specifications, as substandard brake pads not only generate excessive noise but also accelerate rotor wear, leading to higher repair costs.
View MoreRelated News

Mitsubishi Pajero 2026 returns, the new car will be produced by the Thai factory
Kevin WongJan 28, 2026

Mitsubishi Triton (LC2T) returns to the Japanese market, targeting outdoor enthusiasts
MichaelJan 27, 2026

Mitsubishi leverages Foxconn to revive VR, the new car might be named ASX VR-e?
JohnJan 21, 2026

The fifth-generation Mitsubishi Pajero/Montero may return in 2026
MichaelJan 19, 2026

Mitsubishi Lancer Evolution might be resurrected, so what will the new Evo look like?
WilliamNov 14, 2025
View More


Pros
Cons