Q
how to open byd atto 3 bonnet
To pop the bonnet of the BYD Atto 3, first make sure the vehicle is switched off. Then, from the driver's seat, look down to the left of the steering wheel near the door—you'll find a hood release lever with a bonnet icon. Give it a firm pull to release the first latch. Next, head to the front of the car, reach into the gap at the center of the bonnet's leading edge, and feel for the secondary release lever. Gently flip that lever upward while lifting the bonnet. If it feels like it needs a bit more support, use the provided prop rod to hold it securely open.
Quick note: Since the Atto 3 is an EV, the front compartment isn't your typical engine bay. Instead, you'll find the motor, electronic control systems, and charging components here. When checking things out, it's smart to avoid direct contact with high-voltage parts—these are usually marked with orange cables. For maintenance needs, your best bet is to consult the owner's manual or swing by an authorized BYD Malaysia service center.
Also, keeping an eye on the coolant level, brake fluid condition, and windshield washer fluid reservoir is key to keeping your EV running smoothly. If you spot anything off, reach out to a professional technician right away. Tinkering with high-voltage components on your own? Definitely not recommended—safety first!
Special Disclaimer: This content is published by users and does not represent the views or position of PCauto.
Related Q&A
Q
What is the lifespan of the battery in the BYD Atto 3?
The BYD Atto 3's battery lifespan typically sits around 8 to 10 years, though this can vary depending on your driving habits and charging routines. Under the hood (or rather, under the floor), it's packing BYD's in-house developed Blade Battery, a lithium iron phosphate (LFP) unit that's big on safety and long-term durability. Official specs tell us this battery can handle around 3,000 full charge-discharge cycles. Doing some quick math on daily usage, that translates to over 300,000 kilometers driven while still retaining more than 80% of its original capacity.
Now, for our friends in Malaysia, that hot climate might nudge the battery life a tiny bit, but the Blade Battery's thermal management system does a solid job of keeping temperatures in check. A pro tip? Try to avoid super frequent fast charging and leaving the battery sitting at 100% for ages – that'll help stretch its life even further. Let's not forget, battery longevity also ties in closely with regular maintenance. Keeping an eye on the battery's health status and sticking to the manufacturer's service recommendations are key moves.
Here's a reassuring thought: these days, the actual usable life of most EV batteries often outlasts how long owners typically keep their cars. Plus, BYD backs the Atto 3 with an impressive 8-year or 150,000-kilometer battery warranty, which covers the bulk of your ownership journey. So, Malaysian drivers, there's really no need to lose sleep over battery life with this one.
Q
Can you put roof racks on a BYD Atto 3?
Yep, the BYD Atto 3 can definitely handle a roof rack, but you’ll want to stick with accessories specifically designed for this model to make sure everything fits right and stays safe. The Atto 3’s roof comes with pre-installed mounting points, which makes adding crossbars or a roof box a breeze—perfect for hauling bikes, surfboards, or extra luggage when you need the space.
In Malaysia, you can find both genuine BYD roof rack setups and third-party options that are certified, either at auto accessory shops or BYD’s authorized dealers. My tip? Go for products that have passed safety tests. You don’t want to risk damaging the roof structure by skimping here.
When you’re installing, keep an eye on the weight limits. The Atto 3’s dynamic roof load (that’s when you’re driving) is usually around 50-75kg, and the static load (when parked) is higher, but check your owner’s manual for the exact numbers—don’t guess on that.
Also, remember that a roof rack adds wind resistance, which can hit your EV’s range, especially at higher speeds. It’s probably best for shorter trips. And make a habit of checking the bolts now and then to keep everything tight.
For folks in Malaysia, our hot and humid weather can speed up rust on metal parts, so either pick roof racks made with rust-resistant materials or give them regular maintenance to keep them going longer. If you’re loading stuff often, you might also think about a rear-mounted bike rack or a tow hitch as alternatives—just make sure whatever you choose plays by local traffic rules.
Q
How many kilometers is Atto 3 full charge?
The BYD Atto 3, as a pure electric SUV, offers an official range of approximately 480 kilometers on a full charge under the WLTP standard. Now, real-world driving range can vary a bit depending on things like your driving style, road conditions, and how much you use the air conditioning – totally normal, right? But overall, it's more than capable of handling Malaysian drivers' daily commutes and those quick weekend getaways.
Given Malaysia's warm weather, a quick tip: using the AC sensibly and keeping a steady driving pace can really help optimize that range. And let's talk about peace of mind – the Atto 3's Blade Battery technology is a standout here, offering solid safety and stability, which is perfect for our local climate with its frequent rain and high temperatures.
For EV owners, staying on top of battery health checks and planning routes with public charging stations in mind will definitely make your driving experience smoother. Plus, the Atto 3 supports fast charging – you can go from 30% to 80% in around 30 minutes, which means way less time twiddling your thumbs at the charger.
The Malaysian government is really pushing for EV adoption these days, with more charging infrastructure popping up and some nice tax incentives. So, picking a high-value option like the Atto 3 isn't just about enjoying emission-free driving; it's also a smart move to align with the country's growing focus on greener mobility.
Q
Can BYD ATTO 3 self drive?
The BYD ATTO 3, as a pure electric SUV, doesn't come with full self-driving capabilities just yet, but it does pack a pretty advanced Advanced Driver Assistance System (ADAS). This setup delivers a taste of automated driving with features like Adaptive Cruise Control (ACC), Lane Keeping Assist (LKA), and Automatic Emergency Braking (AEB). These tech tools are real lifesavers on highways or in stop-and-go traffic, taking some of the strain off the driver – though it’s crucial to stay alert and ready to take over at any moment.
For Malaysian drivers, the ATTO 3’s smart features should be more than enough for daily commuting needs. That’s especially true in busy urban spots like Kuala Lumpur, where these driver-assist functions can really step up both safety and convenience behind the wheel. It’s worth keeping in mind, though, that while self-driving tech is evolving fast, most cars on the market right now are still at Level 2 assisted driving. Full autonomy (L4 or L5) is still not mainstream. So, while it’s great to enjoy the perks of this tech, it’s just as important to understand the limits of what these systems can do to keep everyone safe on the road.
Beyond its tech, the BYD ATTO 3 also stands out in Malaysia with its solid driving range and local service support. All these factors combined make it a strong contender for anyone looking to jump into the electric vehicle game.
Q
How much does it cost to charge a BYD ATTO 3 at home?
In Malaysia, the cost to charge your BYD ATTO 3 at home really comes down to your electricity rate and the battery size. The ATTO 3 packs around a 60.48kWh battery, right? So if you’re on TNB’s residential tariff, averaging about RM0.30 per kWh, a full charge would set you back roughly RM18.14. Of course, the actual cost might wiggle a bit depending on the time of day you charge or those tiered pricing structures they have.
One thing to note: home charging usually means plugging into an AC slow charger (around 7kW), which takes about 8-10 hours to top up the battery. That’s why most folks find it easiest to charge overnight—perfect for taking advantage of off-peak rates if you can get ’em. Compare that to public DC fast chargers, which can blast you up to 80% in 40 minutes, but man, those things cost 2-3 times more than charging at home. Ouch.
Here’s a pro tip for Malaysian owners: hit up TNB about their EV-specific tariff plans, like the EV Tariff. These often hook you up with sweet discounts for nighttime charging, which can knock down your running costs even more. Now, installing a home charger isn’t free—you’re looking at an initial outlay of around RM2,000 to RM4,000 for installation. But here’s the kicker: over time, you’ll save roughly 60% on energy costs compared to a gas-powered car. Plus, the Malaysian government is throwing in incentives like tax breaks for EV charging gear, so it’s worth chatting with a certified installer to see what deals you can score. Trust me, the long-term savings make that upfront cost totally worth it.
Q
Is the BYD ATTO 3 fully electric or hybrid?
The BYD ATTO 3 is a fully electric SUV with no hybrid option in sight. It's packed with BYD's in-house developed Blade Battery tech, offering around 480km of NEDC range – though your actual mileage might vary depending on how you drive. This makes it a solid fit for Malaysian drivers needing a reliable runabout for daily commutes or quick weekend getaways.
Being a pure EV, the ATTO 3 taps into Malaysia's government incentives for electric vehicles, which means sweet savings on import duties and road tax. Plus, its zero-emission credentials align perfectly with the growing eco-conscious vibe. BYD's no newcomer to the EV game; they're a global leader, and their electric vehicle tech has been road-tested and proven. The ATTO 3 shines when it comes to safety, smart driving assists, and in-car tech – think that cool rotating infotainment screen and the DiLink smart connectivity system.
And let's not forget Malaysia's charging infrastructure is slowly but surely getting better, making life with a pure EV more hassle-free. All in all, the BYD ATTO 3 strikes a nice balance between performance, green credentials, and everyday practicality.
Q
What is the top speed of the byd atto 3?
The BYD Atto 3, as an all-electric SUV, tops out at 160 km/h – more than enough oomph for zipping around Malaysian cities or cruising down the highway. And let's not forget, electric motors are total beasts when it comes to off-the-line acceleration, which the Atto 3 definitely delivers on. Under the hood (or rather, under the floor), you've got a motor cranking out 204 horsepower and 310 Nm of torque. Pair that with BYD's e-Platform 3.0 tech, and you're looking at a smooth, refined drive that's also surprisingly efficient with energy.
Now, Malaysia's tropical climate can be tough on batteries, but the Atto 3's battery management system does a solid job of keeping things stable and performing at their best. That WLTP-rated range of around 400 km? Perfectly suitable for most folks' daily grind around here. On top of that, electric vehicles mean lower maintenance bills and a greener footprint – two big ticks, especially with the Malaysian government really pushing those green mobility initiatives lately.
If you're thinking about making the switch to electric, top speed is just one piece of the puzzle. Charging convenience, how far you can go on a single charge, and reliable after-sales support are huge factors too. And honestly? The Atto 3 checks those boxes pretty well, making it a compelling option in the EV space.
Q
Can I charge my byd atto 3 to 100%?
Can the BYD Atto 3 be charged to 100%? Absolutely, this electric vehicle supports a full charge. However, to maximize battery lifespan, it's best to keep the charge level between 20% and 80% for daily use, only topping it up to 100% when you need maximum range for a long road trip. The Atto 3 is equipped with a lithium iron phosphate (LFP) battery, which offers better thermal stability and a longer cycle life compared to traditional ternary lithium batteries, so occasional full charges won't have much impact on the battery. For Malaysian users, the hot climate can affect battery performance a bit. It's advisable to avoid prolonged charging in high-temperature environments; instead, try to charge in shaded areas or during the cooler night hours to keep the battery in good shape. Additionally, regular use of slow charging helps balance the cell voltages in the battery pack, further enhancing battery efficiency. If you plan to leave the vehicle parked for an extended period, it's recommended to keep the charge around 50%, and when you start using it again, perform a full charge-discharge cycle to calibrate the battery management system.
Q
Does the ByD Atto 3 come with a charging cable?
The BYD Atto 3 typically comes with a standard home charging cable here in Malaysia, letting owners juice up directly from regular household power outlets. But it's worth noting that exact specs might vary a bit depending on the dealer or any ongoing promotions, so it’s always a good idea to check with your local BYD showroom before finalizing your purchase. For Malaysian drivers, that home charging cable is a solid daily companion. Yeah, the charging speed is on the slower side, but it’s super cost-effective—perfect for overnight top-ups when you’re not in a rush. If you need a quicker boost, though, the Atto 3 does support DC fast charging. You’ll just need to hit up public charging stations, which are popping up more and more these days—think shopping malls, petrol stations, and the like across the country. On the support front, BYD’s after-sales network in Malaysia is steadily growing too. Their official app is handy for locating nearby charging spots and service centers, so you can drive with peace of mind. For anyone new to EVs, getting clued up on the different charging options and where the infrastructure is located is key. That way, you can plan your trips better and really make the most of the convenience and eco-friendly perks that come with driving an electric vehicle.
Q
Can you fit 3 car seats in BYD Atto 3?
The BYD Atto 3, as a compact SUV, offers a rear seat width of approximately 1,350 millimeters. On paper, this suggests the possibility of fitting three child seats across, but the real-world feasibility hinges heavily on the specific size and design of the seats you're working with. If you opt for narrower ISOFIX child safety seats – think around 44 centimeters wide each – squeezing three side by side might just work, though it's likely to feel pretty tight. Buckling up could become a bit of a hassle too, with limited room to maneuver the seatbelts.
My advice? Don't just take the specs at face value. Parents should definitely measure the actual space in the car and, better yet, bring their child seats along to the dealership for a test fit. This way, you can check both how securely they latch in and whether there's enough comfort for the little ones.
And hey, let's not forget the legal side of things, especially here in Malaysia. The law is clear: kids must be in approved safety seats. So, when you're shopping, make sure whatever seat you pick carries the UN R44 or R129 certification, and double-check that it's installed correctly every time.
If you're regularly shuttling around multiple children, it might be worth considering a seven-seater alternative. Maybe look at the Atto 3's siblings within the BYD lineup or explore other brands' MPVs. These often provide more flexible interior layouts and can make installing multiple child seats a whole lot easier.
Popular Cars
Model Year
Car Compare
Car Photo
Latest Q&A
Q
What is front wheel braking?
Front-wheel braking refers to a system design where the front wheels take on the primary deceleration task when a vehicle brakes. This is the standard setup in most regular cars because when you hit the brakes, the vehicle's weight shifts forward, and the front wheels need stronger stopping power to keep things stable. The front brake system usually includes components like brake discs, calipers, and brake pads. When you press the brake pedal, the hydraulic system pushes the calipers to clamp down on the discs, using friction to slow the vehicle down. Compared to rear-wheel braking, front-wheel braking delivers more direct deceleration, which is especially crucial during emergency stops. Modern vehicles typically use a mixed braking setup, with the front wheels handling about 70% of the braking force and the rear wheels around 30% to ensure balance. Some high-performance or modified cars upgrade their front brake systems—like using larger discs or multi-piston calipers—to boost braking performance. In daily driving, it’s important to regularly check the wear on the front brake pads. If you hear strange noises when braking or notice a drop in stopping power, you might need to replace the pads or check the brake fluid condition. Knowing this stuff helps car owners maintain their vehicles better and keep driving safe.
Q
What are wheel brakes?
Wheel brakes are the core component of a vehicle's braking system, using friction to convert wheel kinetic energy into heat energy to slow down or stop the vehicle. They mainly come in two types: drum brakes and disc brakes. Drum brakes feature an internal design where brake shoes rub against a rotating brake drum. They're lower in cost and offer good dust resistance, commonly found on the rear wheels of economy cars. Disc brakes, on the other hand, work by calipers clamping down on a rotating brake disc. They provide better heat dissipation and more responsive braking, making them popular for front wheels or high-performance models. Modern vehicles typically use a mixed front-rear setup to balance cost and performance, such as front discs with rear drums or four-wheel discs. It's worth noting that electronic assist technologies like Anti-lock Braking System (ABS) and Electronic Brakeforce Distribution (EBD) are now commonly integrated into wheel brake systems. These systems effectively prevent wheel lock-up and optimize braking force distribution, significantly enhancing safety on slippery roads. In daily use, it's important to check brake pad thickness and brake fluid condition. Unusual noises or increased braking distance are signs that require prompt inspection and repair. Regular maintenance ensures the braking system remains in optimal working condition.
Q
How do I know if I need to replace the suspension?
To determine whether the suspension system needs to be replaced, several common signs can be observed, such as abnormal noise (such as creaking or knocking) when the vehicle is driving, especially when passing through bumpy roads, or feeling the body sinking or tilting significantly, and decreased stability when cornering. In addition, if there is uneven wear on the tires, it may also be due to aging of the suspension system causing inaccurate positioning. If you find that the shock absorber leaks oil (with oil stains on the outer cylinder) or rebounds more than 2-3 times after pressing a corner of the vehicle, it indicates a decrease in shock absorption effect. If you feel a significant increase in bumps during daily driving, which may even affect comfort and handling, it is recommended to check as soon as possible. The suspension system not only affects the riding experience, but also relates to driving safety. During regular maintenance, technicians can focus on inspecting components such as connecting rods, shock absorbers, and bushings. The suspension life of different car models varies greatly, but it is generally necessary to pay attention to aging after driving 80000 to 100000 kilometers. Some high-performance cars or vehicles that frequently drive in harsh road conditions may be replaced earlier. If the budget allows, upgrading the original or reliable auxiliary suspension components can also improve the driving experience, but it is necessary to choose a professional store for installation to ensure accurate parameter tuning.
Q
How to test for bad rear shocks?
To test if your rear shock absorbers are damaged, there are a few simple ways to check. First, look for oil leaks on the shock absorbers when the vehicle is stationary—oil stains or heavy grime buildup usually mean the seals are aging or there’s internal damage. When driving, if you hear a "creaking" noise from the rear wheels when going over bumps, or if the body rolls significantly more during turns, those could be signs the shocks are failing. Another method is the "bounce test": press down hard on the rear of the car near the trunk and let go quickly. If the body bounces more than twice before settling, the shock absorbers' damping ability has deteriorated. During daily driving, longer braking distances or slipping easily in the rain might also be linked to shocks not keeping the tires properly planted. It’s worth noting that frequent driving on rough roads accelerates shock wear. I recommend inspecting the suspension system every 20,000 kilometers and regularly checking tire wear for uneven patterns, as faulty shocks often cause abnormal tire tread wear. If you notice any of these symptoms, head to a professional repair shop for a thorough inspection ASAP to avoid compromising driving safety and handling stability.
Q
How much should it cost to replace rear shocks?
The cost of replacing rear shock absorbers typically ranges from RM800 to RM2500, with the exact price depending on the vehicle model, type of shock absorber, and repair shop chosen. Original equipment manufacturer (OEM) shock absorbers are 20% to 50% more expensive than aftermarket brands, while high-performance or adaptive shock absorbers may cost even more. Installation labor fees are around RM200 to RM400, but luxury cars or models with complex structures may require more labor hours. It's advisable to regularly check the condition of your shock absorbers. If you notice significant leaning during cornering, uneven tire wear, or abnormal noises while driving, these could be signs of aging shock absorbers. When choosing a repair shop, prioritize authorized service centers as they can provide genuine parts and professional diagnostics. Although slightly more expensive, they offer better quality assurance. In daily driving, try to avoid speeding over speed bumps or driving with heavy loads, as these habits can extend the lifespan of your shock absorbers. If on a tight budget, reliable quality aftermarket shock absorbers are also a good option, but note that electronic shock absorbers for some models require professional equipment for matching.
View MoreRelated News

Leapmotor B10 VS BYD Atto 3, a showdown between two automakers adept at price wars
WilliamNov 27, 2025

iCaur 03 vs. BYD Atto 3, how will iCaur 03 challenge the globally best-selling Atto 3?
Kevin WongOct 16, 2025

BYD ATTO 3 Interior Malaysia: Where Simplicity Meets Smart Technology
LienJul 22, 2025

BYD has Launched a K-Car Targeting the Japanese Market, Aiming to Challenge Local Automotive Brands
AshleyMay 20, 2025

BYD Exports 214K Vehicles in Q1, Top Sales in 7 Markets
RobertApr 30, 2025
View More


Pros
Cons