Q

peugeot 3008 how to open fuel cap

To open the fuel filler cap on a Peugeot 3008, you typically need to locate the fuel cap control button near the driver's seat and press it to release the cap. However, it's important to note that the button's location or the method of opening may vary slightly depending on the vehicle's configuration. You can carefully check the interior labels or refer to the relevant instructions in the vehicle's user manual for clarification.
Special Disclaimer: This content is published by users and does not represent the views or position of PCauto.

Related Q&A

Q
how to set up apple carplay peugeot 3008
To set up Apple CarPlay in a Peugeot 3008, you typically need to ensure that your vehicle supports this feature and that your iPhone is running the latest iOS version. Then, navigate to the "Connection" or "Smartphone Connection" option in the vehicle's multimedia system menu and follow the on-screen instructions. Generally, you may need to connect your iPhone to the vehicle's USB port using a USB cable, and the system will automatically recognize and complete the pairing setup. However, specific steps may vary depending on the vehicle's configuration and software version.
Q
what engine oil for peugeot 3008 petrol
For the petrol version of the Peugeot 3008 in Malaysia, a common choice is to use fully synthetic engine oil that meets the vehicle manufacturer's specifications, such as 5W-30 or 5W-40 viscosity. Renowned brands like Mobil 1 and Castrol typically offer products that fulfill these requirements. However, it is important to note that the specific choice of engine oil should also take into account factors such as the vehicle's operating conditions, mileage, and climate.
Q
what is the length of a peugeot 3008
The length of the Peugeot 3008 is typically around 4510 millimeters. However, vehicle dimensions may vary slightly depending on different configurations and versions.
Q
when will the new peugeot 3008 be released
The launch timing of the new Peugeot 3008 typically depends on Peugeot's global strategy and market planning. Currently, there is no specific information regarding the exact release date of the new Peugeot 3008 in Malaysia. Generally, automakers provide advance announcements, but the precise timing is difficult to predict. You can stay updated by following Peugeot's official channels for the latest and most accurate information.
Q
how to connect android phone to peugeot 3008
To connect an Android phone to a Peugeot 3008, you can typically use the Bluetooth function. First, ensure that your vehicle is powered on and in an operational state. Locate the Bluetooth settings option in the vehicle's multimedia system and turn it on. Then, activate the Bluetooth function on your Android phone and search for your Peugeot 3008 in the list of available devices to initiate pairing. You may need to enter a pairing code, which can usually be found in the vehicle's manual. Once the pairing is complete, your Android phone will be successfully connected to the Peugeot 3008.
Q
peugeot 3008 massage seats how to use
To use the massage seats in the Peugeot 3008, you typically need to locate the massage function button in the seat control area. Once pressed, you can select different massage modes and intensity levels. The specific operation may vary slightly depending on the vehicle's configuration, but generally, the function buttons are clearly labeled and intuitive. You can carefully observe the controls around the seat, as there are usually clear icons indicating the massage function.
Q
how to check tyre pressure peugeot 3008
To check the tire pressure of a Peugeot 3008, begin by locating the B-pillar on the driver's side of the vehicle, where the standard tire pressure values are typically indicated. Next, prepare a tire pressure gauge, unscrew the valve cap on the tire, and align the gauge with the valve stem to measure the tire pressure. Should the pressure fall below the recommended level, use an air pump to inflate the tire to the appropriate pressure. It is important to note that measuring and adjusting tire pressure should be done when the tires are in a cool state.
Q
how wide is a peugeot 3008
The width of the Peugeot 3008 is typically around 1841 millimeters. However, it is important to note that the vehicle's dimensions may slightly vary depending on the specific configuration and the year of manufacture.
Q
what engine oil for peugeot 3008 diesel
For the diesel version of the Peugeot 3008, it is recommended to use a fully synthetic engine oil that meets the ACEA C3 specification with a viscosity grade of 5W-40. Renowned brands such as Castrol Magnatec and Mobil 1 are suitable examples. However, the specific choice of oil should also take into account factors such as the vehicle's operating conditions, mileage, and ambient temperature.
Q
what oil for peugeot 3008 petrol
For the petrol version of the Peugeot 3008 in Malaysia, it is generally recommended to use a fully synthetic engine oil that meets the vehicle manufacturer's specifications, with viscosity grades of either 5W-30 or 5W-40. However, the specific choice of engine oil should also consider factors such as the vehicle's operating conditions, mileage, and climate. It is advisable to opt for reputable brands like Shell, Mobil 1, or Castrol to ensure optimal performance and protection for your engine.

Pros

The exterior and interior design has a sense of the future
Rich configuration

Cons

The power is somewhat weak at the low end
The space could have been more spacious

Latest Q&A

Q
How big is Myvi fuel tank?
As one of the most popular national cars in Malaysia, the fuel tank capacity of the Perodua Myvi varies according to different generations and versions. The standard fuel tank capacity of the current third - generation Myvi (from 2017 to present) is 36 liters. It features a lightweight resin fuel tank design, which balances the fuel storage needs and the vehicle's body weight. The fuel tank size of this B - segment model matches the fuel economy of its 1.3L/1.5L engines. It can provide a cruising range of approximately 450 - 550 kilometers under combined driving conditions, making it suitable for urban commuting and short - distance trips. It's worth noting that the actual available fuel tank capacity might be slightly less than the nominal value. This is because about 5% of the tank space is reserved for fuel expansion as a safety measure. For owners planning long - distance drives, it is recommended to use the fuel efficiency display function on the Myvi's dashboard to monitor fuel consumption in real - time. Also, it's advisable to develop the habit of refueling when the fuel gauge shows that there is about 1/4 of the fuel left. This can prevent the fuel pump from overheating and also help deal with the situation where gas stations are far apart in some remote areas of Malaysia. Some comparable models in the same segment, like the Proton Iriz, have a 40 - liter fuel tank. However, the actual cruising range needs to be considered in combination with the engine efficiency. Thanks to Perodua's mature powertrain tuning, the Myvi always maintains a competitive edge in terms of fuel economy.
Q
Does Myvi use CVT?
Yes, the Perodua Myvi does use CVT (Continuously Variable Transmission) technology in some models, especially the newer ones. For instance, the third-generation Myvi, launched in 2017, and its subsequent versions are equipped with D-CVT (Dual Mode Continuously Variable Transmission) to offer a smoother driving experience and better fuel efficiency. CVT technology optimizes engine performance through continuously variable gear ratios. Compared with traditional automatic transmissions, it can adapt to driving conditions more flexibly, thereby enhancing overall driving comfort. However, earlier Myvi models may have used a traditional 4-speed automatic transmission. So, whether a specific model is equipped with a CVT needs to be confirmed based on the model year and configuration. For Malaysian consumers, the advantages of CVT lie in its smoothness and fuel - saving performance during city driving, which is very suitable for the common local traffic conditions. But if you're looking for more direct power feedback, some drivers may prefer the manual transmission version. If you're considering buying a Myvi, it's recommended to check the official specifications or consult a dealer to confirm the transmission type. You can also take a test drive to see if the actual performance of the CVT meets your driving preferences.
Q
What kind of gearbox is Myvi?
The Myvi is equipped with a Dual Mode CVT (D-CVT) transmission, which is a dual-mode continuously variable transmission. Compared with traditional CVT transmissions, it has an additional gear for high-speed driving, which helps the vehicle achieve better fuel efficiency. In daily driving, this transmission drives the vehicle in CVT mode. Thanks to the operation of the steel belt, the vehicle moves smoothly and linearly, enhancing comfort. What makes the D-CVT special is that it automatically switches to the gear mode when driving at high speeds. Different from CVT transmissions of other brands, when driving at high speeds, the engine speed of vehicles with ordinary CVT transmissions will increase, the engine noise will get louder, and the fuel consumption will rise. Moreover, the power will decline after exceeding the maximum horsepower speed. However, after the gear of the D-CVT engages, the engine speed decreases, allowing the engine to maintain a reasonable speed and providing the vehicle with continuous and abundant power.
Q
Are Myvi and vios the same engine?
Some models of the Myvi and the Vios use the same engine. Daihatsu and Perodua have a joint - venture engine production plant in Negeri Sembilan, Malaysia, which provides power for multiple models including the Vios. Some models of the Vios and the Myvi are equipped with the 1.5L Dual VVT - i engine. This engine features high efficiency, reliability, and economy. Although its power is not extremely strong (the official 0 - 100km/h acceleration time of the Myvi 1.5 is 10.2 seconds), its low fuel consumption and durability are well - loved by consumers. However, these two cars have different positioning and market targets. Even if they share the engine platform, there are differences in vehicle tuning, configuration, and the overall driving experience.
Q
How many cylinders are in the MYVI?
As one of the most popular national cars in Malaysia, the engine configurations of the Perodua Myvi vary according to different years and versions. Currently, the mainstream models are equipped with two types of Dual VVT - i four - cylinder naturally aspirated engines, namely the 1.3L (1NR - VE) and 1.5L (2NR - VE). Therefore, all Myvi models feature a four - cylinder design. This four - cylinder layout ensures smooth power delivery while taking fuel economy into account, making it highly suitable for the urban road conditions in Malaysia. It's worth mentioning that four - cylinder engines, due to their simple structure and low maintenance costs, are widely used in B - segment models in the local market. For example, the Proton Saga and Honda City also adopt a similar layout. The 1.5L version of the Myvi can output 102 horsepower and 136 Nm of torque. Coupled with its lightweight body design, it can offer a well - balanced performance whether driving on the congested streets of Kuala Lumpur or cruising on the highway. For readers who want to learn about engine technology, they can note that the Dual VVT - i system used in the Myvi can intelligently adjust the valve timing. This technology shared by Toyota helps to improve fuel efficiency by about 15%. That's why the Myvi has remained one of the most fuel - efficient cars in Malaysia for years.
View More