What does 3.73 gear ratio mean?

Hybrid technology enhances energy efficiency and reduces emissions by coordinating the operation of a fuel engine and an electric motor, with its core lying in the intelligent allocation of usage scenarios for the two power sources. When the vehicle starts or travels at low speeds, it mainly relies on the electric motor for propulsion, with the engine being in a shut-off or low-load state to avoid fuel waste. When stronger power is needed (such as during acceleration or high-speed driving), the engine engages, working with the motor to output power either jointly or independently. The sources of electrical energy include the conversion of surplus energy from the engine's efficient operation (stored in the battery via a generator) and the kinetic energy recovery system during braking. Hybrid systems are categorized into series (where the engine only generates electricity and the motor drives the vehicle), parallel (where the engine and motor can drive the vehicle independently or jointly), and power-split (combining the characteristics of both). For example, Toyota's power-split system prioritizes pure electric mode and switches to hybrid mode when the battery level is low. Plug-in hybrid electric vehicles (PHEVs) support external charging, while non-plug-in hybrids (HEVs) rely on charging from the engine or regenerative braking. In terms of technical details, the motor layout (such as positions P0 to P4) affects system classification; for instance, the P2 motor, located between the clutch and the transmission, belongs to the full hybrid system. By optimizing engine operating conditions, recovering surplus energy, and flexibly switching driving modes, hybrid technology significantly reduces fuel consumption and exhaust emissions while maintaining driving performance, making it one of the important directions in current automotive technology development.

The maintenance cost of hybrid vehicles is not necessarily higher than that of fuel-powered vehicles; the actual expenditure depends on the vehicle structure, maintenance strategy, and brand policies. Although hybrid vehicles add maintenance items for components such as batteries and motors—for example, an annual battery inspection fee of approximately 300-800 ringgit and motor coolant replacement at 420 ringgit every 40,000 kilometers—the engine's workload is reduced due to the assistance of the electric system, allowing the maintenance interval to be extended to 12,000-15,000 kilometers and cutting oil consumption costs by 28%. The regenerative braking system extends the brake pad lifespan to 400,000 kilometers, far exceeding the 40,000 kilometers of fuel-powered vehicles, resulting in significant long-term savings. There are obvious cost differences among different hybrid types: HEVs cost 2,600-3,500 ringgit per year (suitable for annual driving of 15,000 kilometers), PHEVs cost about 3,800-5,000 ringgit (charging frequency affects costs by 30%), and REEVs cost around 4,200-5,500 ringgit. Rational use of manufacturer warranties (such as lifetime battery warranties) and free inspection services can further optimize expenses—for instance, replacing the air conditioner filter oneself saves 50%, and replacing wiper blades oneself saves 60%. Overall, through advantages in fuel economy (30%-50% fuel savings) and component durability, the long-term maintenance cost of hybrid vehicles is often lower than that of comparable fuel-powered vehicles. However, it is necessary to set aside 2,500 ringgit for the major maintenance at 60,000 kilometers and strictly follow special inspections such as the sealing of high-voltage wiring harnesses.

Hybrid vehicles have significant advantages in the local market, but there are also some potential issues that need to be considered. Their core advantage lies in excellent fuel economy: the electric motor assists the internal combustion engine, reducing fuel consumption by approximately 30%, which is particularly suitable for congested urban road conditions while reducing exhaust emissions. The powertrain employs ECVT technology, resulting in smoother acceleration and lower noise levels, offering a superior driving experience compared to traditional fuel-powered vehicles. Most manufacturers, such as Toyota, provide an 8-year unlimited-mileage warranty for key components, mitigating concerns about battery replacement costs. However, these models typically cost 15%-20% more than their conventional fuel-powered counterparts in the same class, primarily due to the manufacturing expenses associated with the dual-power system. Maintenance requires specialized technicians, and prolonged usage may lead to battery performance degradation, though such issues are generally covered under the 8-year warranty. Notably, the energy-saving benefits of hybrid vehicles diminish during high-speed cruising, with their advantages being most evident in urban driving conditions involving frequent stops and starts. Overall, these models are well-suited for daily commuting needs, but prospective buyers should carefully evaluate the trade-off between the higher initial investment and long-term fuel savings.

The main reason for the relatively weak power performance of hybrid vehicles at high speeds lies in the design trade-offs of their powertrain systems. To balance fuel economy and cost control, most hybrid models adopt a combination of small-displacement engines and low-peak-torque motors. Motors can output high torque at low speeds, resulting in excellent acceleration performance during urban driving conditions, but the motor torque decreases at high speeds, while the power reserve of small-displacement engines is limited, leading to insufficient power transition. In addition, after the hybrid vehicle's battery is depleted, the vehicle weight (usually 200-300 kilograms heavier than fuel-powered vehicles) will further increase the engine load, creating a "small horse pulling a large cart" effect. However, high-end hybrid models can alleviate this problem through high-power motors and efficient energy management systems (such as Toyota THS's power-split technology). For example, the Lexus NX 450h+ can accelerate from 0 to 100 km/h in 6.3 seconds, but the price of such models often exceeds 250,000 Malaysian Ringgit. It is worth noting that after 2025, some new hybrid models have optimized the coordination strategy between motors and engines under high-speed operating conditions. For instance, BYD's DM-p system improves high-speed re-acceleration capability through a dual-motor layout.

The choice between hybrid cars and fuel-powered cars should be made after comprehensive consideration of actual usage needs and budget. Hybrid cars have significant advantages in urban traffic congestion: the electric motor drive avoids inefficient engine operation, reducing fuel consumption by approximately 30%-40%. Additionally, they offer more responsive acceleration from standstill and generate less noise. For instance, the Toyota Corolla Cross Hybrid can achieve fuel consumption as low as 3.8L/100km in urban conditions. However, their purchase price is typically RM 20,000 to RM 40,000 higher than equivalent fuel-powered models, and battery replacement costs may exceed RM 15,000. Fuel-powered cars benefit from mature technology. Models like the Proton X50 require only RM 200-300 for maintenance per 10,000-kilometer service interval, with over 90% of service centers across Malaysia capable of providing support, making them ideal for long-distance highway driving. If annual mileage exceeds 20,000 kilometers, the fuel savings from a hybrid car can offset the price difference within five years; for primarily short-distance commuting, fuel-powered vehicles prove more economical. Currently, hybrid car batteries generally carry an 8-year/160,000-kilometer warranty, and mainstream models retain approximately 65% of their value after three years, with the gap compared to fuel-powered cars narrowing to within 5%.