Q
What is the Tyre Pressure of Perodua Axia?
The recommended standard tire pressure for the Perodua Axia typically ranges between 30 and 33 psi (about 2.1 to 2.3 bar). The specific values may vary slightly depending on the model year, tire specifications, and load conditions. For example, when the vehicle is fully loaded, the rear tire pressure may need to be increased to 35 psi, while the spare tire may require up to 60 psi. Owners can find the official recommended values on the sticker on the door frame or in the user manual.
It's worth noting that tire pressure fluctuates with temperature. For every 10°C increase or decrease in temperature, the tire pressure changes by approximately 1 psi. Therefore, it is recommended to check the tire pressure at least once a month, especially before long - distance drives or when the seasons change. Measuring the tire pressure with a tire pressure gauge when the tires are cold is the most accurate method.
If you often drive on rainy roads in Malaysia, maintaining the standard tire pressure appropriately can improve the tire's drainage performance and reduce the risk of skidding. Insufficient tire pressure can increase fuel consumption by 5% and accelerate tire wear, while excessive pressure affects ride comfort. For an economical small car like the Axia, maintaining the correct tire pressure can not only optimize fuel efficiency (the official data shows 15.6 km/L) but also extend the tire's service life. If you notice frequent abnormal tire pressure, it is recommended to check for slow air leaks or wheel rim deformation. If necessary, you can go to the Perodua service center for professional testing.
Special Disclaimer: This content is published by users and does not represent the views or position of PCauto.
Related Q&A
Q
What Segment is Perodua Axia?
The Perodua Axia belongs to the A-Segment vehicles in the Malaysian market, which is the most entry-level microcar category. It mainly targets consumers with limited budgets who prioritize fuel economy. Its body size is compact (about 3,640mm in total length and a wheelbase of 2,450mm). It is equipped with a 1.0L three-cylinder engine and paired with a D-CVT gearbox, highlighting the flexibility for urban commuting and the advantage of low cost. The official fuel consumption data shows that it can travel about 22 kilometers per liter of gasoline, meeting the needs of Malaysian consumers for economical and practical small cars.
In terms of extended knowledge, Malaysia's automobile classification standards usually refer to the European system. Besides the Axia, A-Segment models also include the Proton Saga and other vehicles. These cars are characterized by their affordable prices (the starting price of the Axia is around RM22,000 to RM49,000) and are suitable for narrow road environments. However, their safety configurations have been significantly improved in recent years. For example, all models of the 2023 new Axia come standard with ABS + EBD and dual airbags, and the top - end version is even equipped with the ASA 3.0 advanced safety assistance system, indicating that entry - level car models are gradually upgrading their technological equipment. Consumers can choose different configuration versions according to their budgets. At the same time, it is recommended to test - drive and compare the Proton Iriz in the same class or second - hand B - Segment models before purchasing a car to comprehensively evaluate the balance between space and functionality.
Q
What is the Reslae Value of Perodua Axia?
As one of the best-selling entry-level models in Malaysia, the Perodua Axia shows relatively stable resale value in the used car market. This is mainly due to advantages such as the high vehicle ownership of the brand, low maintenance costs, and good fuel economy. Depending on factors like vehicle age, mileage, vehicle condition, and configuration, Axias that are one to three years old usually retain 60% to 75% of their original price, while those that are five years old are around 40% to 50%. The specific price also needs to refer to market supply and demand and maintenance records. In addition, the durability of the Axia and its extensive service network also support its resale value.
For consumers considering buying a used Axia, it is recommended to give priority to models with complete original factory maintenance records to ensure the vehicle condition. At the same time, pay attention to the configuration differences of minor facelifts in different years. For example, models after 2022 have upgraded safety features, and such updates may have a positive impact on the resale price. In the Malaysian used car market, economical small cars like the Axia usually have a fast turnover rate and are a practical choice for car buyers with limited budgets.
Q
How Many CC is Perodua Axia?
The Perodua Axia is one of the most popular entry - level compact cars in Malaysia. The engine displacement varies across different versions. Currently, the latest model of the Axia is equipped with a 1.0 - liter three - cylinder naturally aspirated engine, with a specific displacement of 998cc. This is a common engine configuration for compact economy cars. This engine emphasizes fuel efficiency and is highly suitable for city commuting and daily use.
For Malaysian consumers, the low displacement of the Axia not only means lower fuel consumption and road tax but also meets the domestic demand for economical and practical vehicles. It's worth noting that engine displacement (CC) doesn't directly determine a vehicle's power performance. Other factors such as horsepower, torque, and gearbox tuning also need to be comprehensively considered. Although the Axia has a relatively small displacement, its lightweight body design and optimized transmission system ensure sufficient power for daily driving.
Moreover, the Malaysian market is quite sensitive to the displacement of compact cars. Therefore, engines around 1.0 liters are very common locally. They can balance performance and cost and are also suitable for the local road conditions and fuel price environment.
Q
What is the Engine in Perodua Axia?
The Perodua Axia is a highly popular economy car in the Malaysian market. It is equipped with a 1.0-liter three-cylinder naturally aspirated engine, model number 1KR-DE. This engine was jointly developed by Perodua and Toyota of Japan. It adopts the double overhead camshaft (DOHC) and variable valve timing (VVT-i) technologies. The maximum power is 67 horsepower and the maximum torque is 91 Nm. It is paired with a 4-speed automatic transmission or a 5-speed manual transmission. The overall performance is smooth and it boasts excellent fuel economy, making it very suitable for urban commuting.
The design of this engine focuses on low fuel consumption and low emissions, meeting the environmental protection requirements of the Malaysian market. At the same time, it also reduces the daily usage cost for car owners. For readers who want to learn more about automotive knowledge, although three-cylinder engines may be slightly inferior to four-cylinder engines in terms of smoothness, their lightweight and high - efficiency features make them very popular in small - displacement models. The addition of VVT - i technology further optimizes power output and fuel efficiency, which are common technological trends in modern small - displacement engines.
Q
What is the Gearbox Type of Perodua Axia?
The transmission types of the Perodua Axia include manual transmission (MT) and continuously variable transmission (CVT). The 2023 Perodua Axia E 1.0 MT is equipped with an MT transmission, offering more direct gear - shifting control for drivers who prefer the manual handling feel and bringing a more engaging driving experience. On the other hand, models like the 2023 Perodua Axia 1.0 G, 1.0 X, 1.0 SE, and 1.0 AV are equipped with a CVT transmission. Its smooth gear changes can provide a more comfortable driving and riding experience and help improve fuel economy under specific operating conditions. The diverse transmission configurations fully meet the personalized needs of different consumers.
Q
What is the PCD Size of Perodua Axia?
The PCD (Pitch Circle Diameter) of the Perodua Axia is 100mm, which means its wheel hub bolt holes are distributed on a circle with a diameter of 100mm. Usually, it is fixed with 4 bolts. This specification is quite common among small cars in the Malaysian market. For example, models like the Proton Saga also use the same PCD size. Understanding the PCD size is very important for car owners when replacing wheels or upgrading tires. You must ensure that the PCD of the new wheels is the same as that of the original vehicle; otherwise, it may lead to installation mismatches or potential safety hazards when driving.
In addition to PCD, when replacing wheels, you also need to pay attention to the center bore diameter (CB) and the offset value (ET). These parameters together determine whether the wheels are suitable for the vehicle. If you plan to modify the wheels of your Axia, it is recommended to choose certified products and consult professional technicians to ensure compatibility and safety. At the same time, after modification, you also need to comply with the regulations of the Malaysian JPJ to avoid affecting the vehicle's annual inspection or insurance rights.
Q
Does Perodua Axia Have Apple Carplay?
Currently, the Perodua Axia doesn't come standard with Apple CarPlay. As one of the most popular entry - level models in the Malaysian market, the Axia focuses more on practicality and economy. Its infotainment system mainly offers basic functions such as Bluetooth connection, USB playback, and radio. If users want Apple CarPlay, they can consider installing a compatible central control system through third - party modification shops. However, it should be noted that this may affect the original factory warranty.
Apple CarPlay is an intelligent connectivity technology that projects the iPhone interface onto the in - car system, enabling convenient operations for functions like navigation, music, and calls. In recent years, many new cars have made it a standard feature. For example, the Proton Saga in the same class provides this function in some high - end versions. Nevertheless, the Axia remains a popular choice for city commuting thanks to its excellent fuel economy and low maintenance costs. It is recommended to weigh the priorities between technological features and practicality based on your own needs before buying a car.
Q
What is the Tyre Brand of Perodua Axia?
As one of the most popular entry - level models in the Malaysian market, the original - equipped tire brands of the Perodua Axia vary according to different years and vehicle versions. The common configurations include tires from the Silverstone brand, widely used in the local market. For example, there are cost - effective and durable tires like the Silverstone Kruizer NS800 or Synergy M5. These tires are specifically designed for the Southeast Asian climate, emphasizing wet - grip and wear resistance.
Some high - end versions may also use entry - level products from other international brands such as Bridgestone or Goodyear to enhance comfort and noise reduction. The tire specifications are usually 165/55 R14 or 165/60 R14, which meet the energy - saving requirements for urban commuting.
It is recommended that car owners regularly check the tire pressure and tread depth. In Malaysia's rainy climate, it's crucial to ensure the tires have good drainage performance. If replacement is needed, you can refer to the original factory specifications or consult a certified repair center. When upgrading, you can also consider energy - saving tires from brands like Michelin or Continental to further reduce fuel consumption. However, be aware that the handling characteristics of different brands of tires may affect your driving experience.
Q
Is Perodua Axia a Good Car? Learn the Pros and Cons Here
As one of the best-selling entry-level models in Malaysia, the Perodua Axia is indeed an economical small car suitable for urban commuting. Its advantage lies in excellent fuel economy. Official data shows that the 1.0L engine paired with a D-CVT transmission can achieve a range of over 18 kilometers per liter, making it very suitable for young families on a budget or first-time car buyers. Meanwhile, its compact body makes it easy to navigate through crowded city areas. The standard dual airbags, ABS, and ISOFIX child seat anchors also meet basic safety requirements. Low maintenance costs and an ample supply of parts are also its notable advantages.
Of course, this car also has some limitations. For example, the engine noise is quite obvious when driving at high speeds, the rear space is a bit cramped for adults, and the entry-level E model is not equipped with an ESC stability control system. If you often drive long distances, you may need to consider a higher - specification version.
It's worth noting that the Axia received a three - star rating from ASEAN NCAP in 2023. It's recommended to test - drive and compare with its counterparts like the Proton Saga or Bezza according to your actual needs before buying a car. At the same time, you can pay attention to the promotional offers regularly launched on the Perodua official website, such as free maintenance packages or low - interest loans. These can further enhance the cost - effectiveness of car ownership.
Q
What is the Width of Perodua Axia?
The width of the Perodua Axia varies depending on the model and generation. For the 2018 - 2019 models, such as the Standard E, Standard G, SE, and Advance, the width is 1,620 millimeters, while the 2019 Axia Style 1.0 AT has a width of 1,625 millimeters. In the 2023 models, the Axia E 1.0 MT has a width of 1,620 millimeters, and the Axia 1.0 G, 1.0 X, 1.0 SE, and 1.0 AV reach a width of 1,665 millimeters. The body width is an important parameter that directly affects the vehicle's handling, its ability to pass through narrow spaces, and the interior space of the passenger compartment and luggage compartment.
Latest Q&A
Q
What is the Second Hand Price of Perodua Axia? Check Used Price Here
As one of the most popular entry - level economy cars in Malaysia, the used car price of the Perodua Axia is affected by factors such as the car's age, mileage, condition, and version (like Standard G, SE, or AV). The second - hand price of the 2020 model is approximately between RM20,000 and RM35,000, while that of the 2017 model may fall between RM15,000 and RM25,000. The specific price needs to be evaluated based on the maintenance records and modification status.
The Axia's good resale value is due to the high reliability of the Perodua brand and low maintenance costs. In particular, the fuel economy of its 1.0L engine (about 21 km/L) is very suitable for city commuting. There is also an abundant supply of parts, making it highly circulated in the second - hand market.
It is recommended that buyers conduct transactions through official certified used - car platforms or well - reputed dealers. They should also check the vehicle's historical report to ensure there are no accident records and pay attention to the proof of regular maintenance. These details can further guarantee the transparency of the car's condition.
If you have a limited budget, you can also consider an Axia with an older age but lower mileage. Its durability has a good reputation among local users, and the long - term ownership cost is relatively low.
Q
What is the Weel Size of Perodua Axia?
The wheel sizes of the Perodua Axia vary depending on the model and year. In the 2023 models, the Perodua Axia E 1.0 MT comes standard with 175/65 R14 tires (including the spare tire). For the 2023 1.0 G, 1.0 X, 1.0 SE, and 1.0 AV models, they are equipped with 175/65 R14 aluminum alloy wheels (both front and rear), and the spare tire is a 175/65 R14 steel wheel.
In the 2019 models, the Perodua Axia E 1.0 MT uses 175/65 R14 tires throughout the vehicle and is equipped with a full - size spare tire. Other 2019 models such as the Axia G 1.0 AT, GXtra 1.0 AT, SE 1.0 AT, Style 1.0 AT, and AV 1.0 AT also use 175/65 R14 tires, and most models are also equipped with full - size spare tires. The 2018 models basically continue this configuration. Most versions use 175/65 R14 tires, and some models have slight differences in the trim levels.
Wheel sizes can affect ride comfort, handling, and fuel efficiency. Larger wheels may improve handling performance but slightly reduce fuel economy, while smaller wheels are more fuel - efficient and can better filter out road bumps.
Q
What is the Fuel Consumption of Perodua Axia?
As one of Malaysia's most popular entry - level models, the Perodua Axia boasts excellent fuel economy. According to official data, the 20203 model of Axia consumes 3.8 to 4.3 liters of gasoline per 100 kilometers. The specific figure depends on the model version and driving conditions. For example, the combined fuel consumption of the 1.0L D - CVT model on a mix of urban and highway roads is about 22 to 23 kilometers per liter. This performance is attributed to its lightweight body design and efficient engine tuning, making it suitable for daily commuting and family use.
For Malaysian consumers, the low fuel consumption of the Axia not only helps save on fuel costs but also suits the local situation of significant fuel price fluctuations. In addition, maintaining good driving habits such as smooth acceleration and regular vehicle maintenance can further improve fuel efficiency.
If you're thinking about buying an economical small car, the Axia's fuel performance and affordable price make it a worthy option. Meanwhile, it is recommended that you pay attention to the actual driving experience during a test drive to more comprehensively evaluate its performance.
Q
Is Perodua Axia Worth Buying? Check out Its Features Here
As one of the best-selling entry-level models in Malaysia, the Perodua Axia is truly worth considering for purchase. It has won the favor of many consumers with its affordable price, low fuel consumption, and reliable performance. The Axia is equipped with a 1.0L three-cylinder engine paired with a 4-speed automatic or 5-speed manual transmission. Its power performance is suitable for city driving, and at the same time, it has excellent fuel efficiency, making it very suitable for daily commuting. Although the interior space is small, it is reasonably laid out. The trunk capacity is sufficient to meet the needs of an average family. The interior design is simple and practical, and it comes with basic safety features such as dual airbags, ABS, and EBD. The high - end versions also offer convenient functions like a reversing camera. In addition, the Axia has low maintenance costs, an ample supply of parts, and convenient repairs, resulting in relatively low long - term usage costs. For consumers with a limited budget or those buying a car for the first time, the Axia is a highly cost - effective option, especially suitable for users who value practicality and economy. If you need more space or stronger power, you can also consider other models in the same class, but the Axia still has obvious advantages in terms of price and overall performance.
Q
What is the Perodua Axia Engine Oil Capacity?
The engine oil capacity of the Perodua Axia is approximately 3.3 liters (including when replacing the oil filter). The exact capacity may vary slightly depending on different years or models. It is recommended to refer to the owner's manual or consult a Perodua authorized service center for accurate information. When choosing engine oil, it's advisable to use 5W - 30 viscosity oil that meets the API SN standard or higher. This type of oil is suitable for the climate conditions in Malaysia and can provide good lubrication and heat dissipation performance. Regularly changing the engine oil (it is recommended to do so every 5,000 to 10,000 kilometers or every 6 months, depending on driving conditions) is the key to maintaining the engine's lifespan and performance, and it can also ensure fuel economy. If you're unsure about how to choose engine oil or perform maintenance, Perodua's service centers will offer professional advice and services to ensure your vehicle is always in the best condition. Additionally, it's also important to use genuine or certified oil filters as they can effectively filter out impurities and protect the engine's internal components.
View MoreRelated News

How Much is the Perodua Axia and How to Get the Best Price for Your Desired Model
WilliamMar 25, 2025

Perodua Axia’s Monthly Payments and Loan Calculation in Malaysia
WilliamMar 21, 2025

The 2023 Perodua Axia is priced from RM 22,000, with the 1.0 E MT offering the highest cost-performance ratio?
LienJun 11, 2024

Perodua Ativa: Why Malaysia's Top Compact SUV?
MichaelJun 12, 2025

All-New Perodua Bezza Coming 2025: Built on Advanced DNGA Platform
LienJun 4, 2025
View More
Pros
Cons